Editing with another VCR (continued)
Notes
•Make sure you connect the plugs to jacks of the same color.
•If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select the input correctly to prevent a humming noise.
•You can use the
•If the other VCR is a monaural type and connected to this VCR’s
•If the other VCR is a monaural type and connected to this VCR’s
Operation (when recording on this VCR)
Before you start editing
•Turn on your TV and set it to the video channel.
•Press INPUT SELECT to display “L2” (or “L1”) in the display window.
•Press SP/EP to select the tape speed, SP or EP.
)
1/u | 0 |
§
P PAUSE
r REC
1Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.
2Insert a tape into this (recording) VCR. Search for the point to start recording and press P PAUSE.
3Press r REC on this VCR and set it to recording pause.
4To start editing, press the P PAUSE buttons on both VCRs at the same time.
To stop editing
Press the p STOP buttons on both VCRs.
Tip
•To cut out unwanted scenes while editing, press P PAUSE on this VCR when an unwanted scene begins. When it ends, press PPAUSE again to resume recording.
Note
•If you start recording following the procedure above, the VCR won’t start recording with the APC function. To record a tape with the APC function, press r REC again
during recording pause in step 3 so that the VCR analyzes the tape. Then when you start recording in step 4, press P PAUSE immediately after the APC indicator stops flashing. If you press P PAUSE before the APC indicator stops flashing, the APC function is canceled.
66Additional Operations