Step 2: Setting up the remote commander (continued)

Controlling other TVs with the remote commander (SLV-L69HF MX, L72HF PA/PC, L79HF CL/CS/VZ, L89HF CL/CS/MX/VZ and X66HF MX only)

The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the table below, set the appropriate manufacturer ’s code number.

1Set TV / VIDEO at the top of the remote commander to TV .

2Hold down 1/u, and enter your TV’s code number(s) using the number buttons. Then release 1/u .

Now you can use the 1/u , VOL +/–, CH +/– and TV/VIDEO buttons to control your TV. You can also use the buttons marked with a dot (• ) to control a Sony TV. To control the VCR, reset TV / VIDEO to VIDEO .

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer

Code

Manufacturer

Code

Manufacturer

Code

 

number

 

 

number

 

number

 

 

 

 

 

 

 

 

Sony

01

JVC

09

 

RCA

04, 10

 

 

 

 

 

 

 

 

Akai

04

KMC

03

 

Sampo

12

 

 

 

 

 

 

 

 

AOC

04

Magnavox

03, 08, 12

 

Sanyo

11

 

 

 

 

 

 

 

 

Centurion

12

Marantz

04, 13

 

Scott

12

 

 

 

 

 

 

 

 

Coronado

03

MGA/Mitsubishi

04, 12, 13, 17

 

Sears

07, 10, 11

 

 

 

 

 

 

 

 

Curis-Mathes

12

NEC

04, 12

 

Sharp

03, 05, 18

 

 

 

 

 

 

 

 

Daytron

12

Panasonic

06, 19

 

Sylvania

08, 12

 

 

 

 

 

 

 

 

Emerson

03, 04, 14

Philco

03, 04

 

Teknika

03, 08, 14

 

 

 

 

 

 

 

 

Fisher

11

Philips

08

 

Toshiba

07

 

 

 

 

 

 

 

 

General Electric

06, 10

Pioneer

16

 

Wards

03, 04, 12

 

 

 

 

 

 

 

 

Gold Star

03, 04, 17

Portland

03

 

Yorx

12

 

 

 

 

 

 

 

 

Hitachi

02, 03

Quasar

06, 18

 

Zenith

15

 

 

 

 

 

 

 

 

J.C.Penny

04, 12

Radio Shack

05, 14

 

 

 

 

 

 

 

 

 

 

 

Notes

•If the TV uses a different remote control system from the one programmed to work with the VCR, you cannot control your TV with the remote commander.

•If you enter a new code number, the code number previously entered will be erased.

•When you replace the batteries of the remote commander, the code number may change. Set the appropriate code number every time you replace the batteries.

•When you press the AUDIO MONITOR button, your TV’s menu may appear on the TV screen. To exit the TV menu, press the MENU button on the TV remote commander or wait until the menu disappears automatically.

6Getting Started