Canal Plus

Set-Top Box control

Symptom

Remedy

You cannot set the

• Check that DECODEUR/LIGNE3 in the OPTIONS-2

channel as the Canal Plus

menu is set to DECODEUR (see page 91).

in the REGLAGE DES

 

CHAINES menu.

 

 

 

You cannot watch the

• Check that DECODEUR/LIGNE3 in the OPTIONS-2

Canal Plus programme

menu is set to DECODEUR (see page 91).

when the VCR is in

• Make sure the Canal Plus Scart cable is plugged securely.

standby mode.

• Check that VEILLE ECO in the OPTIONS-2 menu is set to

 

PARTIELLE or NON (see page 92).

 

 

The Canal Plus

• Make sure the Canal Plus Scart cable is plugged securely.

programme is always

• Check that DECODEUR/LIGNE3 in the OPTIONS-2

recorded scrambled.

menu is set to DECODEUR (see page 91).

 

• Check that this channel is set as Canal Plus in the

 

REGLAGE DES CHAINES menu (see page 47).

The Set-Top Box control

• Make sure you are pointing the remote commander only at

function does not work

the remote sensor on the VCR and not at the STB sensor.

properly.

• Make sure you are pointing the STB controller at the

 

remote sensor on the Set-Top Box.

 

• Make sure the STB controller is connected securely.

 

• The STB tuner brand number may be deleted if you

 

disconnect it from the VCR. Re-enter the brand code

 

number corresponding to your Set-Top Box (see page 27).

 

 

You cannot watch the

• Check that VEILLE ECO in the OPTIONS-2 menu is set to

STB picture when the

PARTIELLE or NON (see page 92).

VCR is in standby mode

• Check that DECODEUR/LIGNE3 in the OPTIONS-2

or recording standby

menu is set to LIGNE3 (see page 91).

mode.

 

 

 

100Troubleshooting