Basic editing
When recording on this VCR
Before you start editing | ENR z | |
• Turn on your TV and set it to the video |
| |
| channel. |
|
• | Press CHOIX ENTREE to display the |
|
| connected line in the display window. |
|
• Press SP/LP to select the tape speed, SP or LP. |
| |
• | On this VCR, set MONTAGE to OUI in the |
|
| X | |
| similar function, turn it on as well. |
|
1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.
2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press X(pause) to set it to playback pause.
3 Press ENR zon this VCR to set it to recording pause.
4 To start editing, press the X(pause) buttons on both VCRs at the same time.
To stop editing
Press the x(stop) buttons on both VCRs.
Tip
•To cut out unwanted scenes while editing, press X(pause) on this VCR when an unwanted scene begins. When it ends, press X(pause) again to resume recording.
Note
•If you start editing following the procedure above, the VCR will not start recording with the OPC function. To record a tape with the OPC function, press ENR z again during recording pause in step 3 so the VCR analyses the tape. Then, press X(pause) after the OPC indicator stops flashing to start recording. If you press X (pause) before the OPC indicator stops flashing, the OPC function is cancelled.
Editing
Basic editing 95