Audio dubbing

This feature lets you record over the normal audio track. The monaural sound previously recorded is replaced while the original hi-fi sound remains unchanged. Use this feature to add commentary to a tape that you have recorded with a camcorder.

Before you start···

DOUBLAGE SON

t LIGNE-2 G o D

X

•Open the tLIGNE-2 G oD jacks cover on the front panel and connect a playback source.

•Turn on the TV and set it to the video channel.

1Insert a source tape into your stereo system (or the playback VCR). Search for the point to start playback and set it to playback pause.

2Insert a prerecorded tape with its safety tab in place into this (recording) VCR. Search for the start of the section to be replaced and press X(pause).

The VCR enters pause mode.

3Press DOUBLAGE SON.

The programme position changes to “L2,” and the indicator appears in the display window.

4To start editing, press the X(pause) buttons on this VCR and the stereo system (or other VCR) at the same time.

After you use this feature, the audio in playback mode is automatically set to monaural.

To stop editing

Press x(stop) on this VCR and the stereo system (or other VCR).

To listen to both the hi-fi and normal audio

Set MIX AUDIO to OUI in the OPTIONS-1 menu (see page 90). Use this feature to listen to dubbed audio over the original hi-fi audio. When MIX AUDIO is set to OUI, the CHOIX SON button does not function.

Remember to reset MIX AUDIO to NON after playing the tape.

Note

•If you eject the tape or turn the VCR off, MIX AUDIO is automatically set to NON.

96Audio dubbing