Manuals / Brands / Photography / Security Camera / Sony / Photography / Security Camera

Sony SNC-CS3N, SNC-CS3P Configuring the Network, DHCP, Contrast, Sharpness, Saturation, IP address, Subnet mask, MAC address, Camera reset, Default gateway, DNS auto acquisition

1 52

Download 52 pages, 1.13 Mb

22

Camera the Administrating

Saturation

Select the saturation in 7 steps, from –3to 3. Selecting 3 gives the image with the highest saturation.

Note

The Saturation setting is effective for the computer image only. (It is not effective for the video signal output.)

Sharpness

Select the sharpness in 16 steps, from 1 to 16. Selecting 16 gives the image with the highest sharpness.

Contrast

Select the contrast in 7 steps, from –3to 3. Selecting 3 gives the image with the highest contrast.

Note

The Contrast setting is effective for the computer image only. (It is not effective for the video signal output.)

Camera reset

Click Apply, and “Camera reset OK?” appears. Click OK on the dialog to reset the camera settings on the Camera setting page to the factory settings.

Configuring the Network— Network setting Page

When you click Network on the Administrator menu, the Network setting page appears.

Use this page to configure the network to connect the camera and the computer.

Wired LAN setting Section

This section provides the menus for connecting the camera through the network cable.

DHCP

Select On to assign the IP address to the camera automatically. When you have assigned a proper IP address to the camera, select Off.

Note

When you set DHCP to On, make sure that there is an DHCP server on the network.

DNS auto acquisition

When DHCP is set to On, select if the IP address of the DNS server is assigned automatically or not. Select On to assign the IP address of the DNS server automatically.

IP address

Type the IP address of the camera.

Subnet mask

Type the subnet mask.

Default gateway

Type the default gateway.

MAC address

Displays the MAC address of the camera.

22 Configuring the Network — Network setting Page

Contents

User’s Guide Owner's Record WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture Power Supply For customers in the U.S.A. (SNC-CS3Nonly) For customers in Taiwan only NOTICE TO USERS Table of Contents Overview Operating the Camera Operating the Camera Using a Pocket PC Others Overview How to Use This User’s Guide Jumping to the related page Software display examples Printing the User’s Guide Installation Manual (printed matter) Operating the Camera Other functions on the welcome page for Administrator About Viewers Java applet viewer ActiveX viewer Configuration of Main Viewer Page Menu Section Frame rate View size Controlling the Monitor Image Selecting the frame rate Selecting the view size Controlling the Application Manually Sending a Still Image File to an FTP Server Sending a Still Image via E-mail Recording a Still Image on the Built-inMemory of the Camera Capturing a Monitor Image To save the captured image Operating the Camera Using a Pocket PC System requirements Configuration of Main Viewer Page Administrating the Camera Buttons common to every setting page General notes on setting pages Configuring the System — System setting Page System setting Section Title bar name Welcome text Default frame rate Default URL System log Access log Date time setting Section Date time format Synchronization with NTP server Initialization Section Backup setting Restore setting Setting the Camera — Camera setting Page Camera setting Section Image size Image quality White balance mode Exposure mode Saturation Sharpness Contrast Configuring the Network — Network setting Page Wired LAN setting Section DHCP DNS auto acquisition Primary DNS Secondary DNS Bandwidth control OK/Cancel HTTP port setting Section HTTP About the special tags Setting the User — User setting Page Administrator, User 1 to User access right Setting the Security — Security setting Page Activating/Deactivating the Security Function — Security usage setting Page Setting the Security Function —Securingsetting Page Sending Images to FTP Server — FTP client setting Page Activating/Deactivating the FTP Client Function — FTP client usage setting Page Setting the FTP Client Function Mode Back/OK Available period Schedule No Alarm buffer configuration Backup sending mode Operating the Digest Viewer Number Date Downloading Images from the Camera Sending an Image via E- mail SMTP server name Recipient e-mailaddress Administrator e-mailaddress Subject Message Setting the Alarm Out 1 or — Alarm out 1 or 2 setting Page Activating/Deactivating the Alarm Out 1 Function — Alarm out 1 usage setting Page Setting the Alarm Out 1 Function Alarm duration Timer mode setting Section Recording Images in Memory — Image memory setting Page Use image memory function/Do not use image memory function Recording an Image in the Memory — Image memory setting Page Capacity warning Periodical recording mode setting Section Directory Structure of Image Memory Setting the Alarm Buffer — Alarm buffer setting Page Recording interval Pre-alarmimages Post-alarmimages Setting the Schedule — Schedule setting Page Schedule No. 1 to Schedule No Setting the Activity Detection Function — Showing the Pop-up — Pop-upsetting Page Manual pop-uptext Alarm pop-uptext Others Using the Supplied Setup Program Page Setting the Date and Time Changing the Communication Bandwidth Assigning the IP Address to the Camera Using ARP Commands Using the SNMP 1. Inquiry Commands 2. Setting Commands Page Storing an HTML File in the Built-inFlash Memory Page Index