Manuals / Brands / Photography / Security Camera / Sony / Photography / Security Camera

Sony SNC-CS3N, SNC-CS3P SMTP, OK/Cancel, Primary DNS, HTTP port No, Secondary DNS, Bandwidth control, Notifying the IP Address, HTTP port setting Section

1 52

Download 52 pages, 1.13 Mb

23

Primary DNS

Type the IP address of the primary DNS server.

Secondary DNS

Type the IP address of the secondary DNS server, if necessary.

Bandwidth control

Limits the data communication bandwidth of the camera.

You can select from among the following:

Unlimited, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0 (Mbps)

Select Unlimited when you do not want to limit the bandwidth.

Notes

•If you limit the bandwidth, the camera performance may be affected, for example, the frame rate of image display may be reduced.

•The actual bandwidth may differ from the selected option depending on the network environments.

OK/Cancel

See “Buttons common to every setting page” on page 17.

HTTP port setting Section

You can set the port number for the HTTP server on the camera.

HTTP port No.

Normally select 80. If you want to use a port number other than 80, select the text box and type a port number between 1024 and 65535.

Note

When you have set the HTTP port No. to a number other than 80 on the Network setting page or in the Setup Program, access the camera by typing the IP address of the camera on the web browser, as follows:

Example: when HTTP port No. is set to 8000

Notifying the IP Address—Dynamic IP address notification Section

When the DHCP menu is set to On, you can send the notification of the completion of the network settings (Wired LAN settings) using the SMTP or HTTP protocol.

SMTP

Select On to send an E-mail when the DHCP setting is completed.

SMTP server name

Type the name or IP address of the SMTP server you want to use for sending an E-mail, up to 64 characters.

Recipient e-mail address

Type the recipient E-mail address up to 64 characters. You can specify only one recipient E-mail address.

From e-mail address

Type the E-mail address that is displayed in the From field of E-mails, up to 64 characters. This is used as the reply address or the address for the system mail from the mail server.

Subject

Type the subject/title of the E-mail up to 64 characters.

Message

Type the text of the E-mail up to 384 characters. You can describe the information of the acquired IP address, etc. using the special tags mentioned below.

Camera the Administrating

Configuring the Network — Network setting Page	23

Contents

User’s Guide Owner's Record WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture Power Supply For customers in the U.S.A. (SNC-CS3Nonly) For customers in Taiwan only NOTICE TO USERS Table of Contents Overview Operating the Camera Operating the Camera Using a Pocket PC Others Overview How to Use This User’s Guide Jumping to the related page Software display examples Printing the User’s Guide Installation Manual (printed matter) Operating the Camera Other functions on the welcome page for Administrator About Viewers Java applet viewer ActiveX viewer Configuration of Main Viewer Page Menu Section Frame rate View size Controlling the Monitor Image Selecting the frame rate Selecting the view size Controlling the Application Manually Sending a Still Image File to an FTP Server Sending a Still Image via E-mail Recording a Still Image on the Built-inMemory of the Camera Capturing a Monitor Image To save the captured image Operating the Camera Using a Pocket PC System requirements Configuration of Main Viewer Page Administrating the Camera Buttons common to every setting page General notes on setting pages Configuring the System — System setting Page System setting Section Title bar name Welcome text Default frame rate Default URL System log Access log Date time setting Section Date time format Synchronization with NTP server Initialization Section Backup setting Restore setting Setting the Camera — Camera setting Page Camera setting Section Image size Image quality White balance mode Exposure mode Saturation Sharpness Contrast Configuring the Network — Network setting Page Wired LAN setting Section DHCP DNS auto acquisition Primary DNS Secondary DNS Bandwidth control OK/Cancel HTTP port setting Section HTTP About the special tags Setting the User — User setting Page Administrator, User 1 to User access right Setting the Security — Security setting Page Activating/Deactivating the Security Function — Security usage setting Page Setting the Security Function —Securingsetting Page Sending Images to FTP Server — FTP client setting Page Activating/Deactivating the FTP Client Function — FTP client usage setting Page Setting the FTP Client Function Mode Back/OK Available period Schedule No Alarm buffer configuration Backup sending mode Operating the Digest Viewer Number Date Downloading Images from the Camera Sending an Image via E- mail SMTP server name Recipient e-mailaddress Administrator e-mailaddress Subject Message Setting the Alarm Out 1 or — Alarm out 1 or 2 setting Page Activating/Deactivating the Alarm Out 1 Function — Alarm out 1 usage setting Page Setting the Alarm Out 1 Function Alarm duration Timer mode setting Section Recording Images in Memory — Image memory setting Page Use image memory function/Do not use image memory function Recording an Image in the Memory — Image memory setting Page Capacity warning Periodical recording mode setting Section Directory Structure of Image Memory Setting the Alarm Buffer — Alarm buffer setting Page Recording interval Pre-alarmimages Post-alarmimages Setting the Schedule — Schedule setting Page Schedule No. 1 to Schedule No Setting the Activity Detection Function — Showing the Pop-up — Pop-upsetting Page Manual pop-uptext Alarm pop-uptext Others Using the Supplied Setup Program Page Setting the Date and Time Changing the Communication Bandwidth Assigning the IP Address to the Camera Using ARP Commands Using the SNMP 1. Inquiry Commands 2. Setting Commands Page Storing an HTML File in the Built-inFlash Memory Page Index