Available period

Select the period for which the alarm mode is available. Always: The alarm mode is available any time.

Use scheduler: The alarm mode is available according to the schedule selected on the Schedule No. menu below.

Schedule No.

When Use scheduler is selected on the Available period menu, select the schedule you want the alarm mode being available.

Click to select the check box(es) 1 to 6. You can select multiple schedules.

To check the contents of schedules, click Schedule check. (See “Setting the Schedule — Schedule setting Page” on page 39.)

Periodical sending mode setting Section

Interval time

Type the interval at which you want to send an E-mail with a still image periodically. You can set the hour (H) and minutes (M) between 30 minutes and 24 hours (one day).

Available period

Select the period for which the periodical sending mode is available.

Always: The periodical sending mode is available any time.

Use scheduler: The periodical sending mode is available according to the schedule selected on the Schedule No. menu below.

Schedule No.

When Use scheduler is selected on the Available period menu, select the schedule you want the perdiodical sending mode being available.

Click to select the check box(es) 1 to 6. You can select multiple schedules.

To check the contents of schedules, click Schedule check. (See “Setting the Schedule — Schedule setting Page” on page 39.)

Setting the Alarm Out 1 or 2— Alarm out 1 or 2 setting Page

When you click Alarm out 1 on the Administrator menu, the Alarm out 1 setting page appears. When you click Alarm out 2 on the Administrator menu, the Alarm out 2 setting page appears.

Use these pages to set up for the Alarm out function that controls the alarm out 1 or alarm out 2 of the I/O port located on the rear the camera. You can control the alarm out when a trigger occurs by an external sensor input, the built-in activity detection function, a manual trigger button or the timer.

The setting items for alarm out 1 and alarm out 2 are the same. This section explains how to set alarm out 1 as an example.

Activating/Deactivating the Alarm Out 1 Function— Alarm out 1 usage setting Page

To activate the Alarm out 1 function, select Use alarm out 1 function and click OK. The Alarm out 1 setting page appears.

When you do not use the Alarm out 1 function, select Do not use alarm out 1 function and click OK.

Setting the Alarm Out 1 Function— Alarm out 1 setting Page

Mode

Select the mode of the Alarm out 1 function.

Manual: Controls the alarm out 1 manually.

In this mode, you can short-circuit and open the

alarm out 1 by clicking the (Trigger) button on the main viewer page. (See “Controlling the Application Manually” on page 12.)

Camera the Administrating

Setting the Alarm Out 1 or 2 — Alarm out 1 or 2 setting Page

33