Baud rate

Select the communication baud rate for the peripheral device connected to the serial interface. You can select from among the following baud rates:

38400, 19200, 9600, 4800, 2400, 1200, 600, 300 (bps)

Parity bit

Select the parity bit for the peripheral device connected to the serial interface: None, Odd or Even.

Character length

Select the character length for the peripheral device connected to the serial interface: 7 or 8 (bits).

Stop bits

Select the stop bit for the peripheral device connected to the serial interface: 1 or 2 (bits).

OK/Cancel

See “Buttons common to every setting page” on page 17.

Setting the Schedule— Schedule setting Page

When you click Schedule on the Administrator menu, the Schedule setting page appears.

Use this page to set up to six schedules used for the FTP client function, SMTP function, Alarm out 1 or 2 function and Image memory function.

Schedule No. 1 to Schedule No. 6

For each schedule, specify Start time (hour and minutes) and End time (hour and minutes), and check the days of the week that you want to activate the function.

OK/Cancel

See “Buttons common to every setting page” on page 17.

Camera the Administrating

Setting the Schedule — Schedule setting Page

39