Sony SRP-X700P Setting Requirements

How to Control AV Equipment from the SRP-X700P

The SRP-X700P can control the Sony equipment connected to the CONTROL S OUTPUT1 through 4 terminals. The procedure to set up the MACHINE CONTROL on the SRP-X700P Manager, and the functions, which can be operated, from the SRP-X700P are shown in the table below. Note that the functions of REC, POWER ON, and POWER STANDBY cannot be operated from the supplied software SRP-X700P Manager and User Control Panel, to prevent the system from malfunctioning.

MACHINE	Supported equipment					Operations
										POWER ON/
TYPE		PREV.	NEXT	STOP	REW.	PLAY	F.F.	PAUSE	REC	STANDBY
DVD∗1	DVD player	a	a	a	a	a	a	a	—	a
	DVD recorder ∗2
VTR1 (Beta)	Betamax VCR	—	—	a	a	a	a	a	a	a
VTR2 (8mm)	8 mm video VCR	—	—	a	a	a	a	a	a	a
VTR3 (VHS)	VHS VCR	—	—	a	a	a	a	a	a	a
VTR4 (DV)	Digital video VCR	—	—	a	a	a	a	a	a	a
CD	CD player	a	a	a	a	a	a	a	—	a
MD	MD recorder	a	a	a	a	a	a	a	a	a
CD-R	CD-R for audio	a	a	a	a	a	a	a	a	a
Blu-ray Disc ∗3	Blu-ray disc recorder ∗2	a	a	a	a	a	a	a	—	a
Inst. VTR	Professional use VCR (DVCAM and others) ∗4	a	a	a	a	a	a	a	a	a
	Network player ∗5
Cassette Deck	Audio cassette deck ∗6	—	—	a	a	a	a	a	a	a

*1 Set the remote control mode of the deck in use, to the DVD1 mode before use.

*2 The “Recording” function of the DVD recorder and that of the Blu-ray disc recorder are not supported so that they cannot be controlled.

*3 Set the remote control mode of the deck in use, to the BD1 mode before use.

*4 If you want to use the control S terminal of the DSR series to control the VCR, select “Inst. VCR”. If you want to use the AV mouse VM-50 (option) to control the VCR, select the VCR4 (DV) mode.

*5 For the network player (NSP-100), only the Play, Pause and Stop functions on the play list that is set for the Play button one-touch playback are enabled. *6 If you use the double cassette audio deck, only the deck B can be controlled.

Use the supplied IR transmitter VM-50 to control the Sony equipment that is not equipped with the CONTROL S terminal.

•Confirm location of the remote control signal receptor part of the Sony equipment that you want to control, and fix the supplied IR transmitter VM-50 with a both-sided adhesive tape as shown below.

Setting Requirements

	5cm			View from the front		5cm			View from the top
20cm					IR receiver
			IR LED
20cm
								10cm
									Front panel side
					Service area				of the equipment
		VM-50
							VM-50

Install the VM-50 inside a rack. Recess the IR receiver behind the IR LED by more than 10 cm. Install the IR receiver in the location that is within the range of 20 cm higher and 20 cm lower than the IR LED (as shown by the dotted line of the illustration). The IR receiver of the equipment should be located more than 5 cm far from the IR LED in the right and left.

Note

If any screening object is placed in between the IR LED and the IR receiver, the infrared ray is blocked to disable control of the external equipment.

•Operate the SRP-X700P Manager or the User Control Panel to confirm that it can control the Sony equipment. If they cannot control the equipment, change position of the supplied IR transmitter VM-50 until they can control the equipment.

Connecting the Speaker

Speaker connection method changes depending on the operating mode.

When the “70 V LINE” mode is selected, the output signal becomes monaural. Connect the (+) terminal of a speaker to the (+) terminal (red) of SPEAKERS CH-1 and the (–) terminal of a speaker to the (+) terminal (red) of SPEAKERS CH-2.

• Connecting speakers with				• Connecting speakers with
low impedance [Lo imp.]				high impedance [70 V LINE]
CH-1	+	+		CH-1	+
CH-1	–	–		CH-1	–	+
CH-2	–	–		CH-2	–	–
CH-2	+	+	Impedance	CH-2	+	Impedance
			4Ω to 16Ω			32Ω to 10kΩ

The table below shows the number of speakers that can be connected in the high impedance [70 V LINE] mode.

Impedance	Power applied to	Number of speakers
	each speaker	you can connect
1 kΩ	5 W	30
3.3 kΩ	1.5 W	100	∗ The notation in [ ] is displayed in the
10 kΩ	0.5 W	300
			SRP-X700P Manager.

11