Sony SRP-X700P AUDIO, REMOTE, OTHERS, VIDEO/S VIDEO, COMPONENT/RGB, SPEAKERS OUTPUT, AUDIO INPUT/OUTPUT, VIDEO/RGB INPUT/OUTPUT

Specifications

AUDIO INPUT/OUTPUT

Input	Terminal shape	Circuit	Channel	Reference input level	Maximum input level	Impedance
MIC 1/WL 1,
MIC 2/WL 2,	XLR 3-31type∗	Balanced	Monaural	–60 to –45 dBu	–37 to –22 dBu	2.2 kΩ or more
MIC 3, MIC 4
MIC 5/LINE 1	XLR 3-31type∗	Balanced	Monaural	–60 to –45 dBu	–37 to –22 dBu	2.2 kΩ or more (in MIC mode)
MIC 6/LINE 2				–10 to +4 dBu	+10 to +24 dBu	10 kΩ (in LINE mode)
LINE 3	Pin	Unbalanced	Stereo	–10 to 0 dBu	+10 dBu	10 kΩ or more
LINE 4 (A B C F)	Pin	Unbalanced	Stereo	–10 to 0 dBu	+10 dBu	10 kΩ or more
LINE 4 (D E)	Pin	Unbalanced	Stereo/	–10 to 0 dBu	+10 dBu	10 kΩ or more
			5.1 surround
Output	Terminal shape	Circuit	Channel	Reference output level	Maximum output level	Load impedance
LINE OUT 1-2	XLR 3-32type∗	Balanced	Monaural	–10/–5/0/+4 dBu	+24 dBu	600 Ω or more
LINE OUT 3-8	Pin	Unbalanced	Monaural	–10/–5/0 dBu	+15 dBu	10 kΩ or more
REC OUT 1-2	Pin	Unbalanced	Monaural	–10/–5/0 dBu	+15 dBu	10 kΩ or more

∗ Pin-1: GND	Pin-2: HOT Pin-3: COLD
SPEAKERS OUTPUT
Output		Terminal shape	Impedance	Maximum output
CH 1			4 Ω to 16 Ω	150 W + 150 W (8 Ω 1 kHz, T.H.D 10%)
CH 2		Screw-type terminal	4 Ω to 16 Ω	200 W + 200 W (4 Ω 1 kHz, T.H.D 10%)
70 V LINE			32 Ω to 10 kΩ	150 W (32 Ω 1 kHz, T.H.D 10%)

When ATT is set to 0 dB, 150 W + 150 W (across 8 Ω) power is output at the 0 VU setting of the output signal level.

VIDEO/RGB INPUT/OUTPUT

	Input	Terminal shape	Signal format		Level		Impedance
LINE 4	(A B C)	Pin	Composite	1	Vp-p (75Ω)	75	Ω
		MINI Din	Y/C	1	Vp-p (Y)/0.286 Vp-p (C)	75	Ω
LINE 4	(D E F)	HD D-sub 15-pin	Component/RGB	0.7 Vp-p (video signal)		75	Ω (video signal)
				1 to 5 V (sync signal)		47 kΩ (sync signal input)

Output	Terminal shape	Signal format	Level		Impedance
R/R-Y, G/Y, B/B-Y,	BNC	Component/RGB	0.7 Vp-p (video signal)	75	Ω (video signal)
SYNC/HD, VD			1 to 5 V (sync signal)	47 kΩ (sync signal input)
S VIDEO	MINI Din	Y/C	1 Vp-p (Y)/0.286 Vp-p (C)	75	Ω
VIDEO	BNC	Composite	1 Vp-p	75	Ω

AUDIO		REMOTE
Frequency response	20 Hz to 20 kHz ± 0.5 dB	PROJECTOR CONTROL
	(with LINE OUT, 1 kHz reference)	RS-232C	D-sub 9-pin (male)
T.H.D	0.01 % or less (LINE OUT, 1 kHz)	CONTROL S IN/OUT	Mini jack
S/N ratio	94 dB or more (LINE 3, LINE 4, IHF-A)	REMOTE
Crosstalk	–85 dB or less (between LINE channels,	PARALLEL I/O	D-sub 25-pin (female)
	1 kHz with input cutoff)	IN	Make contact input
Equivalent input noise level			Logic: C-MOS LEVEL active L
	–124 dBu or less (–60 dBu, with input		Input pulse width: 100 msec or more
	terminated in 150 Ω, IHF-A)	OUT	Open collector output
0 dBu = 0.775 V			Withstand voltage: +24 V or less
			Maximum sink current: 40 mA
VIDEO/S VIDEO		RS-232C	D-sub 9-pin (male)
Frequency response	50 Hz to 10 MHz	USB (front/rear)	TYPE-B

COMPONENT/RGB		OTHERS
		ANT IN terminal	BNC DC +9 V is supplied.
Frequency response	50 Hz to 150 MHz
		+48 V power supply	Supplied to MIC 1 to MIC 6 XLR
	480 p, 1080 i,
			terminals. (For MIC 1 to MIC 4,
	1280 ⋅ 1024 60 Hz (SXGA) supported
			supplied when the +48 V button is
			ON.)
			(For MIC 5 and MIC 6, supplied at
			MIC level setting only.)

18