Names and Functions of Controls on Screen
1.1 BLOCK Screen
The BLOCK screen displays the setup status and the signal level according to the internal blocks in the
If you click a button, the screen jumps to the related setup screen. You can select ON/OFF and set parameters on each screen.
3456 78 9 qa qd qfqg qh qj qk
2
w;
1
ws
wa
0 qs ql
You can enter an index of each input channel. By entering the name of the connected equipment as the index, you can easily check the signal system when setting the parameters. You can enter up to 8 alphanumeric characters.
2TRIM buttonThe reference level of each input channel that is set on the INPUT OVERVIEW screen appears on the TRIM buttons.
3Input level meterDisplays the input signal level of each input channel.
4LCFWhen you turn on the LCF button, it lights in green.
5PEQ (Parametric EQualizer) buttonWhen you turn on the PEQ button, it lights in green.
6FR (Feedback Reducer) buttonWhen you turn on the FR button, it lights in green.
The AUTOMATIC MIXER button lights in green while the AUTOMATIC MIXER is in operation.
qd OUTPUT MUTING buttonThe OUTPUT MUTING button lights in red when muted.
qf OUTPUT fader displayDisplays the setup value of the OUTPUT fader.
qg EQ (EQualizer) buttonWhen you turn on the EQ button, it lights in green.
qh DELAY buttonWhen you turn on the DELAY button, it lights in green.
qj Output level meterDisplays the output signal level of each output channel.
qk REF LEVEL buttonDisplays the reference level of each output channel on the button that is set on the OUTPUT OVERVIEW screen.
When you turn on the COMP button, it lights in green.
8INPUT fader displayDisplays the setup value of the INPUT fader.
9INPUT MUTING buttonThe INPUT MUTING button lights in red when muted.
0INPUT VIDEO TYPE displayDisplays the video input signal format of A to F of LINE4.
Displays the output ATT level to the internal power amplifier.
w; OUTPUT indexYou can enter an index of each output channel. You can enter up to 8 alphanumeric characters.
wa CLIP indicatorThe CLIP indicator lights in red when the internal power amplifier starts clipping. Adjust the output level using wf ATT so that the CLIP indicator does not turn on frequently.
The screen jumps to the ROUTING screen when this button is pressed.
The PROTECTION indicator lights in red when the power amplifier protection circuit operates.
8