Unpacking
Check that you received the following items with the tuner:
•Audio cord (1)
•AM loop aerial (1)
•FM wire aerial (1)
•EON connecting cord (1)
Hooking up the System
Before you get started•Turn off the power to all components before making any connections.
•Do not connect the mains lead until all of the connections are completed.
•Be sure to make connections firmly to avoid hum and noise.
•When connecting an audio cord, be sure to match the
This section describes how to connect the supplied AM loop aerial. For the specific location of the AM ANTENNA terminals, see the illustration below.
AM ANTENNA
AM ANTENNA
What will I need?
• AM loop aerial (supplied) (1)
1Before assembling the supplied aerial, pull the lead wire out from the slot in the aerial frame.
2Unwrap 3 lengths of the braided lead wire from around the frame of the aerial. Be careful to unwrap only the braided section of the lead wire. Do not unwrap more than 3 lengths of the lead wire. Also, be careful not to unbraid the lead wire.
3Assemble the supplied aerial as shown below.
4Connect the AM loop aerial to the AM terminals on the back of this unit.
ANTENNA
AM loop aerial
AM
y
5Adjust the aerial direction for the best reception. The AM loop aerial has a directivity which detects the signal from some angles more strongly than others. Set the aerial to the orientation which provides the best receiving condition.
If a high pitched noise (beat noise) occurs when recording AM broadcasts, adjust the position of the AM loop aerial so that the noise disappears.
If you live in a building constructed of reinforced concrete, or with a steel frame, you may not be able to achieve good reception since the radio waves become weaker indoors. In this case, we recommend connecting an optional aerial such as the Sony
zFor stations that are difficult to receive
Try repositioning the loop aerial while tuning. Placing the supplied AM loop aerial near a window will help improve reception quality.
4GB