Receiving

Broadcasts

This chapter describes how to receive FM or AM broadcasts and how to preset selected stations.

You can tune in stations on this receiver in the following ways:

Automatic/Manual Tuning

If you don’t know the frequency of the station you want, you can let the receiver scan all available stations in your area (see page 49). You can also use the jog dial to find the frequency manually (Manual Tuning).

Preset Tuning

After you have tuned in stations using Direct Tuning or Automatic Tuning, you can preset them to the receiver (see page 50). Then you can tune in any of the stations directly by entering its 2-character code using the supplied remote (see page 50). Up to 30 FM or AM stations can be preset. The receiver will also scan all the stations that you have preset (see page 50).

Direct Tuning Using the Remote

You can enter a frequency of the station you want directly by using the numeric buttons on the supplied remote (see page 51).

Before you begin, make sure you have:

•Connected an FM and AM antenna to the receiver (see page 5).

•Selected the appropriate speaker system (see page 27).

48