Direct Tuning Using the Remote
Use the supplied remote to perform the following operations.
For details on the buttons used in this section, see the operationg instructions for the supplied remote.
1 Touch FUNCTION and SUB on the remote to select
TUNER.
The last received station is tuned in.
2 Press FM/AM to select the FM or AM band.
3 Touch DIRECT on the remote.
4 Press the numeric buttons to enter the frequency.
Example 1: FM 102.50 MHz

1b 0 b 2 b 5 b 0

Example 2: AM 1350 kHz

(You don’t have to enter the last “0” when the tuning scale is set to 10 kHz.)

1 b 3 b 5 b 0

If you cannot tune in a station and the entered numbers flash

Make sure you’ve entered the right frequency. If not, repeat Steps 3 and 4.

If the entered numbers still flash, the frequency is not used in your area.

5If you’ve tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception.

6Repeat Steps 2 to 5 to receive another station.

zIf you try to enter a frequency that is too precise for the tuning scale

The entered value is automatically rounded up or down.

Using the Tuner Menus

See “Automatic/Manual tuning” (page 49), “Preset Tuning” (page 50) and “Direct Tuning Using the Remote” (this page) for details.

pTuning mode setting (TUNE MODE)

Initial setting : AUTO

To tune in receivable stations automatically, select “AUTO”.

When you want to tune in a station that has a signal too weak to be tuned in AUTO mode, select “MANUAL” to change the frequency manually.

pFM mode (FM MODE)

Initial setting : STEREO

Normally, select “STEREO”. If FM stereo reception is poor, select “MONO”. You will not be able to enjoy the stereo effect, but the overall sound will be clearer.

pNaming preset stations (FM)

This setting lets you register a name of up to 8 characters for the currently selected preset station. Touch or to move the position and turn the jog dial to select a character. When you are finished entering the name, press ENTER. When you want to clear a name that has been registered, touch or to make the 8 character boxes blink. Turn the jog dial one click to the right to make the name appear as 8 spaces and then press ENTER.

zYou can display the frequency of the station being received

Press TUNER, and then press repeatedly during reception of a station that has a name registered.

pAM Tuning scale (AM X kHz –> Y kHz)*

Initial setting : NO

You can change the AM tuning scale. Press TUNER to

enter the tuner menu and press or repeatedly to display “AM X kHz nY kHz”. Turn the jog dial to display “YES” and press ENTER. When “Are you sure?” appears in the display, turn the jog dial to select “YES” and press ENTER again. When you change the AM tuning scale, AM preset stations are cleared.

* Except for Singapore/Malaysia models.

pClearing preset stations (PRESET CLEAR)

Initial setting : NO

Broadcasts Receiving

51