Specifications

AUDIO POWER

SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 120 watts per channel minimum RMS power, with no more than 0.05% total harmonic distortion from 250 milliwatts to rated output.

(U.S.A. model only)

Audio section

POWER OUTPUT

Stereo mode 8 ohms

120 W + 120 W

4 ohms

100 W + 100 W (THD 0.05%,

20 Hz - 20 kHz)* (DIN 1 kHz)

Surround mode

8 ohms

Front: 120W + 120W

Centera): 120W Reara):

120W + 120W

4 ohms

Front: 100W + 100W

Centera): 100W Reara):

100W + 100W (THD 0.05%,

20 Hz - 20 kHz)* (DIN 1 kHz)

* U.S.A./Canada models only.

a)Depending on the sound field settings and the source, there may be no sound output.

Frequency response

PHONO:

20 Hz ~ 20 kHz RIAA ±0.5 dB LINE (TUNER, CD,

MD/DAT, TAPE, TV/SAT or TV/LD, DVD/LD or DVD, VIDEO 1, 2, and VIDEO 3):

10 Hz ~ 100 kHz +0.5/–2.0 dB

(ANALOG DIRECT)

Signal-to-noise ratio

DIGITAL: 100 dB (A, 20 kHz LPF) PHONO: 86 dB** (A, 5 mV)

LINE: 100 dB** (A, 20 kHz LPF)

** ANALOG DIRECT

Inputs (Analog)

PHONO:

Sensitivity: 4 mV

Impedance:

50kilohms

LINE (TUNER, CD, MD/DAT, TAPE, TV/SAT or TV/LD, DVD/LD or DVD, VIDEO 1, 2, and VIDEO 3): Sensitivity: 200 mV Impedance:

50kilohms

Inputs (Digital)

Coaxial (DVD/LD or

DVD, CD) :

Sensitivity: –

Impedance: 75 ohms

Optical (DVD/LD or

DVD, TV/SAT or

TV/LD, MD/DAT) :

Sensitivity: –

Impedance: –

Outputs (Analog)

REC OUT (MD/DAT, TAPE, VIDEO 1, 2, 3): Voltage: 200 mV, Impedance:

1kilohm

PRE OUT (FRONT L/R,

CENTER, REAR L/R,

SUB WOOFER): Voltage: 2 V Impedance:

1kohms

PHONES:

Accepts low- and high-impedance headphones

Outputs (Digital)

Optical (MD/DAT)

Sampling Frequency

48 kHz

EQBASS:

99 Hz ~ 1.0 kHz

(21 steps) MID:

198 Hz ~ 10 kHz

(37 steps)

TREBLE:

1.0kHz ~ 10 kHz

(23 steps)

Gain levels:

±10 dB, 0.5 dB step

Decodable Digital Formats

Dolby Digital (AC-3),

DTS

Information Additional

59