Using the Radio Data
System (RDS)
(Models of area code CEL, CEK only)
This receiver also allows you to use RDS (Radio Data System), which enables radio stations to send additional information along with the regular program signal. You can also display RDS information.
Notes
•RDS is operable only for FM stations.
•Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS services in your area, check with your local radio stations for details.
Receiving RDS broadcasts
Simply select a station on the FM band using automatic tuning (page 10), direct tuning (page 11), or preset tuning (page 12).
When you tune in a station that provides RDS services, the program service name appears in the display.
Note
RDS may not work properly if the station you tuned to is not transmitting the RDS signal properly or if the signal strength is weak.
Displaying RDS information
While receiving an RDS station, press DISPLAY repeatedly.
Each time you press the button, RDS information on the display changes cyclically as follows:
Program Service name t Frequency t Program Type indicationa) t Radio Text indicationb) t Current Time indication (in 24- hour system)
a)Type of program being broadcast (see page 14).
b)Text messages sent by the RDS station.
Notes
•If there is an emergency announcement by government authorities, “ALARM” flashes in the display.
•When the message consists of 9 characters or more, the message scrolls across the display.
•If a station does not provide a particular RDS service, “NO XXXX” (such as “NO TEXT”) appears in the display.
Operation Amplifier
continued
13GB