4:Connecting the AC power cord

Connecting the AC power cord

Connect the AC power cord to a wall outlet.

AC OUTLET *

AC power cord

AC OUTLET

Performing initial setup operations

Before using the receiver for the first time, initialize the receiver by performing the following procedure.

This procedure can also be used to return settings you have made to their factory defaults. Use the buttons on the receiver for the operation.

1 Press ?/1 to turn off the receiver.

2 Hold down ?/1 for 5 seconds.

“INITIAL” appears in the display. The following are reset to their factory settings.

•All preset stations.

•All index names for inputs and preset stations.

•All settings for the speaker system and sound adjustments.

•MASTER VOLUME –/+ is set to “VOL MIN”.

Started Getting

To a wall outlet

*The configuration, shape, and number of AC outlets vary according to the model and the area code.

Notes

•Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble.

•The AC OUTLET on the rear of the receiver is a switched outlet, which supplies power to the connected component only while the receiver is turned on.

•Make sure that the total power consumption of the component connected to the receiver’s AC OUTLET does not exceed the wattage stated on the rear panel. Do not connect high-wattage electrical home appliances such as electric irons, fans, or TVs to this outlet. This may cause a malfunction.

9GB