Other Operations
Naming preset stations and inputs
You can enter a name of up to 8 characters for preset stations and inputs selected with input buttons, and display it in the receiver’s display. Use the buttons on the receiver for the operation.
1 To index a preset station
Press TUNER, then tune in the preset station you want to create an index name for (page 12).
To index an input
Press the input button to select the input you want to create an index name for.
2 Press NAME.
3 Use NAME and TUNING/CHAR + or TUNING/CHAR – to create an index name.
Press TUNING/CHAR + or TUNING/ CHAR – repeatedly to select a character, then press NAME to move the cursor to the next position.
Tips
•You can select the character type as follows by pressing TUNING/CHAR + or TUNING/ CHAR – repeatedly.
Alphabet (upper case) t Numbers t Symbols
•To enter a blank space, press TUNING/CHAR + or TUNING/CHAR – repeatedly until a blank space appears in the display.
•If you made a mistake, press NAME repeatedly until the character you want to change flashes, then press TUNING/CHAR + or TUNING/ CHAR – repeatedly to select the correct character.
4 Press MEMORY/ENTER to store the index name.
Note (Models of area code CEL, CEK only)
When you name an RDS station and tune in the station, the Program Service name appears instead of the name you entered. (You cannot change the name of a Program Service name. The name you entered will be overwritten by the Program Service name.)
16GB