Changing the factory setting of an input button

If the factory settings of the input buttons do not match your system components, you can change them. For example, if you have a tape deck and you do not have an MD deck, you can assign the MD/TAPE button to your tape deck.

Note that the settings of the TUNER button cannot be changed.

1 Hold down the input button whose input you want to change (for example, MD/ TAPE).

2 Press the corresponding button of the component you want to assign to the input button (for example, 4 – Tape deck).

The following buttons are assigned to select the input:

To operate

Press

CD player

1

 

 

DAT deck

2

 

 

MD deck

3

 

 

Tape deck A

4

 

 

Tape deck B

5

 

 

LD player

6

 

 

VCR (command mode VTR 1*)

7

 

 

VCR (command mode VTR 2*)

8

 

 

VCR (command mode VTR 3*)

9

 

 

TV

0

 

 

DSS (Digital Satellite Receiver)

>10

 

 

DVD player

ENTER

 

 

VCD player

.

 

 

*Sony VCRs are operated with a VTR 1, 2 or 3 setting. These correspond to Beta, 8mm and VHS respectively.

Now you can use the MD/TAPE button to control the tape deck.

To reset a button to its factory setting

Repeat the above procedure.

To reset all the input buttons to their factory setting

Press ?/1, AV ?/1 and MASTER VOL – at the same time.

22GB