Selecting the speaker system
To drive the speakers, select the speaker system as follows:
To drive | Depress SPEAKERS button |
|
|
Speaker system A (connected | A |
to the FRONT SPEAKERS A |
|
terminals) |
|
|
|
Speaker system B (connected | B |
to the FRONT SPEAKERS B |
|
terminals) |
|
|
|
Both speaker systems A and | A+B |
B (series connection) |
|
|
|
Note
No sound is heard when you press SPEAKERS A+B without connecting speaker system B.
Where do I go next?
Go on to the next section to connect the AC power cord.
Getting Started
AC Hookups
Connecting the AC power cord
Connect the AC power cord from this receiver and from your audio/video components to a wall outlet. If you connect other audio components to the SWITCHED AC OUTLET on the receiver, the receiver can supply power to the connected components so you can turn on/off the whole system when you turn on/ off the receiver.
SWITCHED AC OUTLET
/
to a wall outlet
Caution
Make sure that the power consumption of the component connected to the receiver’s AC outlet does not exceed 120 watts. Do not connect
Where do I go next?
Before you use theÊ receiver, go to the next section to make sure that all the controls are set to the appropriate positions.
Before You Use Your Receiver
Before you start using your receiver, make sure that you have:
•Turned VOLUME to the leftmost position (0).
•Selected the appropriate speaker system. (See “Selecting the speaker system” on this page.)
•Set BALANCE to the center position.
Turn on the receiver and check the following display.
•Press MUTING on the remote if the MUTING is displayed.
7