Turn off the receiver.

Adjustments using the SET UP menu (continued)

xDecode priority (DEC. XXXX)

Sets the appropriate decoding for incoming digital signals.

•PCM priority mode (DEC. PCM) Use to enjoy playback from audio CD (PCM) and DVD. When used with media other than CD or DVD, you may experience noise. If this happens, switch to AUTO mode.

•AUTO mode (DEC. AUTO)

Use to enjoy playback from audio CD (PCM), DVD, DTS-CD and DTS-LD sources. However, with audio CDs, you may not be able to listen the very first moments of each track.

Normally, use as-is with the initial settings above.

Changing the command

mode of the receiver

This function is useful when you use 2 Sony receivers in the same room.

1

2 Hold down ENTER and press 1/u to turn on the receiver.

“C.MODE.AVX” appears in the display. Each time you repeat the procedure above, the display changes as follows: C.MODE.AV1 yC.MODE.AV2

Tip

The initial setting is “C.MODE.AV2”.

Notes

•The command mode of the supplied remote is “AV2” and you cannot change this setting.

•If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver.

36GB