Models of other area code
Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W2) | |
80 W + 80 W2) |
Reference Power Output2) (8 ohms 1 kHz, THD 10 %)
FRONT1): 120 W/ch | |
| CENTER1): 120 W |
| SURR1): 120 W/ch |
FRONT1): 100 W/ch | |
| CENTER1): 100 W |
| SURR1): 100 W/ch |
1)Depending on the sound field settings and the source, there may be no sound output.
2)Measured under the following conditions:
| Area code | Power requirements |
| E2/E3 | 240 V AC, 50 Hz |
|
|
|
| SP, CEL, CEK, AR, | 230 V AC, 50 Hz |
| CN, KR |
|
|
|
|
| TW | 110 V AC, 60 Hz |
|
|
|
Frequency response |
| |
|
| |
MULTI CH IN | 10 Hz – 50 kHz | |
field and tone bypassed) | ||
MD/TAPE, DVD, |
| |
VIDEO 1, 2 |
| |
|
| |
CD/SACD | 10 Hz – 70 kHz | |
only) | ||
|
| field and tone bypassed) |
|
| |
Inputs (Analog) |
| |
|
| |
MULTI CH IN | Sensitivity: 500 mV | |
Impedance: 50 kilohms | ||
SACD | S/N4): 96 dB | |
only), CD | (A, 500 mV5)) | |
only), MD/TAPE, DVD, |
| |
VIDEO 1, 2 |
| |
|
|
|
4)INPUT SHORT (with sound field and tone bypassed).
5)Weighted network, input level.
Inputs (Digital)
DVD (Coaxial) | Sensitivity: – |
| Impedance: 75 ohms |
| S/N: 100 dB |
| (A, 20 kHz LPF) |
|
|
CD/SACD (Optical) | Sensitivity: – |
Impedance: – | |
VIDEO 2 (Optical) | S/N: 100 dB |
| (A, 20 kHz LPF) |
|
|
Outputs
MD/TAPE (OUT), | Voltage: 500 mV |
VIDEO 1 | Impedance: 10 kilohms |
(AUDIO OUT) |
|
|
|
SUB WOOFER | Voltage: 2 V |
| Impedance: 1 kilohms |
Tone |
|
Gain levels: | ±6 dB, 1 dB step |
FM tuner section |
|
Tuning range | 87.5 - 108.0 MHz |
Antenna terminals | 75 ohms, unbalanced |
Intermediate Frequency | |
| 10.7 MHz |
Sensitivity |
|
Mono: | 18.3 dBf, 2.2 µV/75 ohms |
Stereo: | 38.3 dBf, 22.5 µV/75 ohms |
Usable sensitivity | 11.2 dBf, 1 µV/75 ohms |
S/N |
|
Mono: | 76 dB |
Stereo: | 70 dB |
Harmonic distortion at 1 kHz | |
Mono: | 0.3% |
Stereo: | 0.5% |
Separation | 45 dB at 1 kHz |
Frequency response | 30 Hz – 15 kHz, |
| |
Selectivity | 60 dB at 400 kHz |
continued
Information Additional