Specifications (continued)
AM tuner section
Tuning range
Models of area code U, CA
With
With
Models of area code E2/E3
With
With
Models of area code CEL, CEK, SP, CN, TW, KR, AU
With
Models of area code AR, MX
With
Antenna | Loop antenna |
Intermediate Frequency | |
| 450 kHz |
Usable sensitivity | 50 dB/m (at 1,000 kHz or |
| 999 kHz) |
S/N | 54 dB (at 50 mV/m) |
Harmonic distortion | 0.5 % (50 mV/m, 400 Hz) |
Selectivity |
|
At 9 kHz: | 35 dB |
At 10 kHz: | 40 dB |
6)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. Hold down PRESET TUNING + and press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs |
|
Video: | 1 |
Component Video
Y: | 1 |
0.7 | |
0.7 | |
Outputs |
|
Video: | 1 |
Component Video
Y: | 1 |
0.7 | |
0.7 |
General
Power requirements
Area code | Power requirements |
U, CA, MX | 120 V AC, 60 Hz |
|
|
CEL, CEK | 230 V AC, 50/60 Hz |
|
|
SP, AR, CN, KR | 220 – 230 V AC, 50/60 Hz |
|
|
E2/E3 | 120/220/240 V AC, 50/60 Hz |
|
|
TW | 110 V AC, 50/60 Hz |
|
|
AU | 240 V AC, 50Hz |
| |
Power consumption | |
Area code | Power consumption |
|
|
U, MX | |
|
|
CA | |
| |
|
|
CEL, CEK, KR, | |
AU | |
|
|
SP | |
| |
|
|
CN | |
|
|
E2/E3, AR | |
|
|
TW | |
|
|
Power consumption (during standby mode)
0.3 W
Dimensions | 430 ⋅ 145 ⋅ 298 mm |
| (16 7/8 ⋅ 5 6/8 ⋅ 11 6/8 in.) |
| including projecting parts |
| and controls |
Mass (Approx.) |
|
7.5 kg (16 lb 9 oz) | |
7.2 kg (15 lb 14 oz) |
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander
R6
For details on the area code of the component you are using, see page 4.
Design and specifications are subject to change without notice.