5:Preparing the receiver and the remote

Connecting the AC power cord (mains lead)

Connect the AC power cord (mains lead) to a wall outlet.

Notes

•Before connecting the AC power cord (mains lead), make sure that the stripped end of the speaker cords are not touching each other between the speaker terminals.

•Connect the AC power cord (mains lead) firmly.

AC power cord (mains lead)

Performing initial setup operations

Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults.

Be sure to use the buttons on the receiver for this operation.

1,2

?/1

 

 

 

 

 

 

 

MASTER VOLUME

 

 

 

 

 

 

DISPLAY

INPUT MODE

 

 

 

 

 

 

 

INPUT SELECTOR

 

SPEAKERS

 

 

 

 

 

 

 

 

(ON/OFF)

 

 

 

 

 

 

 

 

MEMORY/

TUNING

 

 

 

 

 

ANALOG

MUTING

ENTER

MODE

TUNING

2CH

A.F.D.

MOVIE

MUSIC

DIRECT

PHONES

Started Getting

FRONT

L

R

To the wall outlet

3

1 Press ?/1 to turn off the receiver.

2 Hold down ?/1 for 5 seconds.

“PUSH” and “ENTER” appears on the display alternately.

3 Press MEMORY/ENTER.

After “CLEARING” appears on the display for a while, “CLEARED” appears.

All the settings you have changed or adjusted are reset to the initial settings.

25US