There is severe hum or noise.

Check that the speakers and components are connected securely.

Check that the connecting cords are away from a transformer or motor, and at least 10 feet away from a TV set or fluorescent light.

Move your audio components away from the TV.

The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

There is no sound, or only a very low- level sound is heard from the center/ surround speakers.

Select a CINEMA STUDIO EX mode (page 43).

Adjust the speaker level (page 26).

Make sure the center/surround speakers are set to either “SMALL” or “LARGE” (page 33).

There is no sound from the sub woofer.

Check that the sub woofer is connected correctly and securely.

Make sure you have turned on your sub woofer.

Make sure the sub woofer is set to “YES” (page 33).

There is no sound from the sub woofer depending on the sound field.

There is no sound from the component connected to the DIGITAL MEDIA PORT adapter.

Adjust the volume of this receiver.

The DIGITAL MEDIA PORT adapter and/or component is not connected correctly. Turn off the receiver, then reconnect the DIGITAL MEDIA PORT adapter and/or component.

Check the DIGITAL MEDIA PORT adapter and/or component device to make sure it supports this receiver.

There is no sound from the speakers of the receiver when you connect the receiver and the playback component via a HDMI connection.

Make sure that you have connected the digital audio jacks on the playback component to the receiver. Then, turn off TV’s volume or activate the TV’s muting function.

The surround effect cannot be obtained.

Make sure the sound field function is on (press MOVIE, or MUSIC).

Sound fields do not function for signals with a sampling frequency of more than 48 kHz.

Dolby Digital or DTS multi channel sound is not reproduced.

Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format.

When connecting the DVD player, etc., to the digital input jacks of this receiver, check the audio setting (the settings for the audio output) of the connected component.

Video

Additional

 

 

 

 

There is no picture or an unclear

 

picture appears on the TV screen.

 

• Select the appropriate input using the input

Information

buttons.

 

• Set your TV to the appropriate input mode.

 

• Move your audio components away from

 

the TV.

 

The source image input to the HDMI jack on the receiver is not output from the TV.

Check the HDMI connection.

Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component.

continued

59US