You can check the sound field, etc., by changing the information on the display.
Be sure to use the buttons on the receiver for this operation.
Press DISPLAY repeatedly.
Each time you press the button, the display changes cyclically as follows.
All inputs except the FM and AM bandIndex name of the input* t Selected input t Sound field currently applied
FM and AM bandPreset station name* t Frequency t Sound field currently applied
*Index name appears only when you have assigned one to the input or preset station (page 49, 52). Index name does not appear when only blank spaces have been entered, or it is the same as the input name.
Note
Character or marks may not be displayed for some languages.
You can set the receiver to turn off automatically at a specified time.
Press SLEEP repeatedly while the power is on.
Each time you press the button, the display changes cyclically as follows:
tOFF
When sleep timer is activated, the display dims.
Note
If you press any buttons on the remote or receiver after the display dims, the display brightens up. After a while, the display dims again if no button is pressed.
Tip
To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears on the display. If you press SLEEP again, the sleep timer will be canceled.
53US
Operations Other