Sony STR-DN1050, STR-DN850

MULTI CHANNEL AV RECEIVER

STR-DN1050/STR-DN850

Enjoying sound of TV broadcasts from the receiver

If your TV supports the Audio Return Channel (ARC) function, set the receiver by the following procedure to output the

sound of the TV from the speakers connected to the receiver.

1. Select [Settings] - [HDMI Settings] from the home menu.

2. Select [Control for HDMI].

3. Select [On].

If you connect to a TV that is not compatible with the Audio Return Channel (ARC) function

or you want to select an audio signal using a cable other than an HDMI cable (e.g. via an

optical digital cable or an audio cable)

Switch the audio input mode. For details, see “Switching between digital and analog audio ( Input Mode).”

Note

Be sure to turn off the volume of the TV or activate the muting function of the TV.

If your TV does not support the System Audio Control function, set [Audio Out] to [TV+AMP] in the HDMI Settings

menu to output the sound of the TV from the TV speaker and the speakers connected to the receiver.