MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Method 4: Setting up a network connection by adding a new access point (manual setup method)You can input the network name (SSID) you want manually if it does not appear on the list.
1. Select [Settings] - [Network Settings] from the home menu.
2. Select [Internet Settings].
3. Select [Wireless] (*).
* You cannot select [Wireless] if a LAN cable is connected to the receiver.
4. Select [Manual Registration].
5. Select [Direct Input].
6. Enter the network name (SSID) you want using the on-screen keyboard. Press /// and to select the
characters one by one, then select [Enter].
The name you entered is registered.
7. Select the security setting you want.
8. Enter the security key (WEP key, WPA/WPA2 key) using the on-screen keyboard. Press /// and to
select the characters one by one, then select [Enter] to confirm the security key.
The screen for selecting the IP address acquisition method is displayed on the TV screen.
9. Select [Auto].
10. Select [OK].
The receiver starts connecting to the network. For details, refer to the messages that appear on the TV screen.
After the network settings are complete, [ ] lights up on the display panel.
If using a fixed IP address
Select [Manual] in step 9. The IP address input display appears on the TV screen.
Enter the value for [IP Address ] using the on-screen keyboard. Press /// and to select the characters one
by one, then select [Enter] to confirm the value.
Enter the values for [Subnet Mask ], [Default Gateway], [Primary DNS] and [Secondary DNS], then select [Next].
Hint
See [Information] when checking the network settings.
Help Guide
146