Sony STR-DN1050, STR-DN850 Using bi-amplifier connections

MULTI CHANNEL AV RECEIVER

STR-DN1050/STR-DN850

Using bi-amplifier connections

If you are not using surround back speakers or front high speakers, you can connect the front speakers to the

SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals using a bi-amplifier connection.

STR-DN850 is used for illustration purpose in this section.

Connect the jacks on the Lo (or Hi) side of the front speakers to the SPEAKERS FRONT A terminals, and connect the

jacks on the Hi (or Lo) side of the front speakers to the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT

B terminals.

Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers to avoid receiver

malfunction.

After you have made the bi- amplifier connection, set [SB Speaker Assign] in the Speaker Settings menu to [Bi-Amp].

Note

You can only set [SB Speaker Assign ] if the speaker pattern is set to a setting that does not have surround back and

front high speakers.