Sony STR-DN1050, STR-DN850 The Control for HDMI function does not work.

MULTI CHANNEL AV RECEIVER

STR-DN1050/STR-DN850

The Control for HDMI function does not work.

Check the HDMI connection.

Make sure [Control for HDMI ] is set to [On] in the HDMI Settings menu.

Make sure the connected device supports the Control for HDMI function.

Check the Control for HDMI settings on the connected device. Refer to the operating instructions of the connected

device.

If you unplug the HDMI cable or change the connection, repeat the procedures of “Preparing for “BRAVIA” Sync.”

When [Control for HDMI] is set to [Off], “BRAVIA” Sync does not work properly, even if the device is connected to the

HDMI IN jack.

The types and number of devices that can be controlled by the “BRAVIA” Sync feature are restricted by the HDMI

CEC standard as follows:

Recording devices (Blu-ray Disc recorders, DVD recorders, etc.): up to 3 devices

Playback devices (Blu-ray Disc players, DVD players, etc.): up to 3 devices

Tuner-related devices: up to 4 devices (the receiver uses one of them for its GUI operations.)

AV receivers (audio systems): up to 1 device

Make sure your TV is connected to the HDMI OUT A jack of the receiver (for STR- DN1050 only).

Make sure the HDMI OUTPUT setting is set to [HDMI A] or [HDMI A + B] (for STR-DN1050 only).

Notes on use

4-488-938-11(1)

Help Guide

330