Multi channel surround setup (continued)
Specifying the speaker parameters
1
2 Press the cursor buttons (U or u) to
select the parameter you want to adjust.
3 Press + or – to select the setting you want.
The setting is stored automatically.
4 Repeat steps 2 to 3 until you have set all of the parameters that follow.
Initial settings
Parameter | Initial setting | ||
L | R | (FRONT) | LARGE |
C | (CENTER) | LARGE | |
SL | SR | (SURR) | LARGE |
SW | (SUB WOOFER) | S.W. YES | |
L | R | (FRONT) XX.X m | DIST. 16 feet |
C | (CENTER) XX.X m | DIST. 16 feet | |
SL | SR | (SURR) XX.X m | DIST. 11 feet |
SL | SR | (SURR) PL. XXX | PL. BEHD. |
SL | SR | (SURR) HGT. XXX | HGT. LOW |
Tips for the speaker settings
When you use micro satellite speaker system, you can easily adjust the settings for the speaker size and sub woofer selection. Turn off the power, then turn on again while pressing the cursor button U. “MICRO SP.” appears in the display and the speaker size and the sub woofer selection are fixed to the following settings.
Speakers | Settings |
Front | SMALL |
|
|
Center | SMALL |
|
|
Surround | SMALL |
|
|
Sub woofer | S.W. YES |
|
|
You cannot change the configuration if you choose
MICRO SP.
To reset to the normal settings, turn off the power, then turn on again while pressing the cursor button U.
xFront speaker size (
L 
R 
)
•If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE”.
•If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select “SMALL” to activate the bass redirection circuitry and output the front channel bass frequencies from the sub woofer.
•When the front speakers are set to “SMALL”, the center and surround speakers are also automatically set to “SMALL” (unless previously set to “NO”).
xCenter speaker size (
C 
)
•If you connect a large speaker that will effectively reproduce bass frequencies, select “LARGE”. However, if the front speakers are set to “SMALL”, you cannot set the center speaker to “LARGE”.
•If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select “SMALL” to activate the bass redirection circuitry and output the center channel bass frequencies from the front speakers (if set to “LARGE”) or sub woofer.*1
•If you do not connect a center speaker, select “NO”. The sound of the center channel will be output from the front speakers.*2
14