The remote does not function.
•Point the remote at the remote sensor 
on the receiver.
•Remove any obstacles in the path between the remote and the receiver.
•Replace both batteries in the remote with new ones, if they are weak.
•Make sure you select the correct function on the remote.
•If the remote is set to operate the TV only, use the remote to select a source or component other than TV before operating the receiver or other component.
Reference sections for clearing the receiver’s memory
To clear | See |
All memorized settings | page 13 |
|
|
Customized sound fields | page 23 |
|
|
Specifications
AUDIO POWER SPECIFICATIONS:
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
with 8 ohm loads both channels driven, from 120 Hz – 10 kHz; rates 100 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo mode (8 ohms 1 kHz, THD 0.09 %)
80 W + 80 W
Reference Power Output
(THD 0.3%) | Front1): 80 W/ch |
| Center1): 80 W |
| Surround1): 80 W/ch |
1)Depending on the sound field settings and the source, there may be no sound output.
Frequency response |
|
MICRO SP.: | 150 Hz – 20 kHz |
| |
| 150 Hz (6 dB/oct) |
| Low cut Filter ON |
NORMAL SP.: | 20 Hz – 20 kHz |
|
Inputs (Analog) | Sensitivity: 250 mV |
| Impedance: 50 kilohms |
| S/N2): 95 dB |
| (A, 20 kHz LPF, |
| 250 mV3)) |
2)INPUT SHORT.
3)Weighted network, input level.
Inputs (Digital)
DVD (Coaxial) | Sensitivity: – |
| Impedance: 75 ohms |
| S/N: 95 dB |
| (A, 20 kHz LPF) |
TV, AUX (Optical) | Sensitivity: – |
| Impedance: – |
| S/N: 95 dB |
| (A, 20 kHz LPF) |
Outputs
FRONT L/R, CENTER, SURROUND L/R,
SUB WOOFERVoltage: 2 V Impedance: 1 kilohms
Video section
Inputs |
|
Y: 1 | |
| C: 0.286 |
Outputs |
|
Y: 1 | |
| C: 0.286 |
FM tuner section |
|
Tuning range | 87.5 – 108.0 MHz |
Antenna terminals | 75 ohms, unbalanced |
Intermediate frequency | |
| 10.7 MHz |
Sensitivity | Mono: 18.3 dBf, |
| 2.2 µV/75 ohms |
| Stereo: 38.3 dBf, |
| 22.5 µV/75 ohms |
Usable sensitivity | 11.2 dBf, 1 µV/75 ohms |
S/N | Mono: 76 dB |
| Stereo: 70 dB |
Harmonic distortion at 1 kHz | |
| Mono: 0.3% |
| Stereo: 0.5% |
Separation | 45 dB at 1 kHz |
Frequency response | 30 Hz – 15 kHz |
| |
Selectivity | 60 dB at 400 kHz |
continued
Information Additional
29