Other Operations
Using the Sleep Timer
You can set the receiver to turn off automatically at a specified time.
Press SLEEP on the remote while the power is on.
Each time you press the button, the display changes cyclically as follows:
tOFF
The display dims after you have specified the time.
Tips
•You can freely specify the time. After pressing SLEEP, specify the time you want using the cursor buttons (U or u) on the receiver. The sleep timer can be set with an interval of 1 minute between
1minute and 5 hours, and with an interval of
1second for less than 1 minute.
•To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears in the display.
Adjustments using the
SET UP button
The SET UP button allows you to make the following adjustments.
1
2 Press the cursor buttons (U or u) to
select the parameter you want to adjust.
When you select MULTI VI. or TUNER VI., M[XXX] or T[XXX] appears in the display after about 2 seconds.
3 Press + or – to select the setting you want.
The setting is stored automatically.
4 Repeat steps 2 to 3 until you have set all of the parameters that follow.
Initial settings
Parameter | Initial setting |
MULTI VI. | DVD |
|
|
TUNER VI. | OFF |
|
|
xMULTI CH IN visual select
Lets you specify the video input to be used with the audio signals from the MULTI CH INPUT jacks.
xTUNER visual select
Lets you specify the video input to be used with the
26