1Press one of the Function buttons to select the component you want to use.
The Function buttons on the remote are factory- set as follows:
To listen to or watch | Press |
|
|
Radio programmes | TUNER |
|
|
Compact discs (CD) | CD |
|
|
MiniDiscs (MD) or | MD/TAPE |
audio tapes | |
|
|
TV programmes | TV |
|
|
VHS Video tapes | VIDEO |
|
|
DVD | 5.1 CH |
|
|
If you want to change the factory setting of a button, see the next section.
The receiver and the selected component turn on.
If the component does not turn on
Press the power switch on the component.
2Start playing.
Refer to “Remote Button Descriptions” on page 24 for details.
To turn off the components
Press SYSTEM STANDBY. You can turn off the video and audio components connected to the SWITCHED AC OUTLET at the same time.
Note
Press SYSTEM STANDBY together with the TUNER button to set SYSTEM STANDBY switch to turn only the receiver on or off. Press SYSTEM STANDBY together with the 5.1 CH button to return the SYSTEM STANDBY switch to normal operation.
Receiver Operations
Changing the factory setting of a function button
If the factory settings of the FUNCTION buttons don’t match your system components, you can change them. For example, if you have two CD players and you don’t have a tape deck or an MD recorder, you can assign the MD/TAPE button to your second CD player.
Note that the settings of the TUNER button cannot be changed.
Function buttons
Numeric buttons
1Hold down the Function button whose function you want to change (MD/TAPE, for example).
2Press the corresponding numeric button of the component you want to assign to the Function button (1 - CD player, for example).
The numeric buttons are assigned to select the functions as follows:
Numeric button | Operates |
|
|
1 | CD player |
|
|
2 | DAT deck |
|
|
3 | MD deck |
|
|
4 | Tape deck A |
|
|
5 | Tape deck B |
|
|
6 | LD player |
|
|
7 | VCR (remote control mode VTR 1*) |
|
|
8 | VCR (remote control mode VTR 2*) |
|
|
9 | VCR (remote control mode VTR 3*) |
|
|
0 | TV |
|
|
Enter | DVD |
|
|
*Sony VCRs are operated with a VTR 1, 2 or 3 setting. These correspond to Beta, 8mm and VHS respectively.
Now you can use the MD/TAPE button to control a second CD player.
To reset the setting to the factory setting
Repeat the above procedure.