Using Surround sound
Adjusting the speaker volume
The test tone feature lets you set the volume of your speakers to the same level. (If all of your speakers have equal performance, you don’t have to adjust the speaker volume.)
Using the controls on the remote lets you test the speaker connection and adjust the volume level from your listening position.
1Press SOUND FIELD ON/OFF to turn on the sound field.
Press SOUND FIELD MODE +/– repeatedly to select “PRO LOGIC”.
2Press TEST TONE on the remote.
You will hear the test tone from each speaker sequentially.
3Adjust the volume level so that the test tone from each speaker is at the same level from your listening position.
•To adjust the level of centre speaker, press LEVEL CENTER + or – on the remote.
•To adjust the level of rear speakers, press LEVEL REAR + or – on the remote.
4Press TEST TONE on the remote to turn off the test tone.
You can adjust all speakers at one time
Adjust MASTER VOL on the remote or MASTER VOLUME on the receiver.
You can also adjust the volume level with the controls on the receiver
After pressing TEST TONE on the remote:
•Press CENTER to select the centre speaker. Press +/– to adjust the level.
•Press REAR to select the rear speaker. Press +/– to adjust the level.
Adjusting the delay time
You can make the surround sound more effective by delaying the output from the rear speakers (delay time). You can select from three delay times, S (15 mS), M (20 mS), and L (30 mS). For example, if you’ve placed the rear speakers in a large room or apart from your listening position, set the delay time shorter.
1Start playing a programme source encoded with Dolby Surround sound.
2Press EFFECT/DELAY or EFFECT/DELAY on the remote repeatedly to choose the delay time parameter. The current delay time appears in the display, such as “DELAY S,” “DELAY M” or “DELAY L.”
Note
Select the PRO LOGIC mode when you adjust the delay time using EFFECT/DELAY on the receiver.
You can increase the output level of the rear speakers
The adjustment range of the rear speakers is preset from
•Press SET UP repeatedly until “REAR SET UP” appears on the display.
•Press +/– repeatedly until “GAIN UP” appears on the display.
The values for the rear level remain fixed at
To reset the rear level adjustment range, repeat this |
|
procedure to display “NORMAL”. | (continued) |
|