Performing Initial Setup Operations
Once you have hooked up the speakers and turned on the power, clear the receiver’s memory. Then specify the speaker parameters (size, position, etc.) and perform any other initial setup operations necessary for your system.
Before turning on the receiver
Make sure that you have:
•Turned MASTER VOLUME to the leftmost position (0).
•Selected the appropriate front speakers (see “wl SPEAKERS selector” on page 28).
Clearing the receiver’s memory
Before using your receiver for the first time, or when you want to clear the receiver’s memory, do the following.
1/u
|
| 5 |
| 4 | 6 |
1/u | 3 | 7 |
|
| |
| 2 | 8 |
| 1 | 9 |
| 0 | 10 |
OFF A B |
|
A+B
– | + | – | + |
–+
1Turn off the receiver.
2Hold down ?/1 for 5 seconds.
The currently selected function appears in the display. All of the following items are reset or cleared:
•All preset stations are reset or cleared.
•All sound field parameters are reset to their factory settings.
•All index names (of preset stations and program sources) are cleared.
•All adjustments made with the SET UP button are reset to their factory settings.
•The sound field memorized for each program source and preset stations are cleared.
•The EQ BANK settings are cleared.
Performing initial setup operations
Before using your receiver for the first time, use the SET UP button to adjust the setup parameters so that they correspond to your system. You can adjust the following items. For details on how to make adjustments, see the page in parenthesis.
•Speaker size and placement (pages 18~20).
•Speaker distance (pages 20~21).
•Selecting the 5.1CH video input (page 55).
•Digital power management (page 55).
•Video power management (page 55).
•Sound field link (page 55).
•Whether other components will turn on or off
automatically via the CONTROL A1 control system (page 55).
•2 way remote control system operation (page 56).
•Selecting the command mode (page 56).
•Select the TV color system of the monitor (except for models of area code UC and TW) (page 56).
•Selecting the color of the
Demonstration Mode
The demonstration is activated when you turn on the system while pressing SET UP. When the demonstration starts, the following message appears in the display twice:
“Now Demonstration Mode!! To finish the demonstration, please push POWER KEY while this message appears in the display. Thank you!”
To cancel the demonstration
Press ?/1 to turn the receiver off during the previous message. The next time you turn the receiver on, the demonstration will not appear.
To view the demonstration
Hold down SET UP and press ?/1 to turn on the power.
Note
Running the demonstration will clear the receiver’s memory. For details on what will be cleared, see “Clearing the receiver's memory” on this page.
System Speaker the Up Setting and Up Hooking
17