Adjustments Using the SET UP Button

The SET UP button allows you to make the following adjustments.

Selecting the 5.1CH video input

This parameter lets you specify the video input to be used with the audio signals from the 5.1CH INPUT jack. The 5.1CH video input is set to DVD/LD by default.

1Press SET UP.

2 Press the cursor buttons ( or ) to select “5.1CH V:”.

3Turn the jog dial to select the video input you want.

Power to video circuitry

“AUTO OFF” turns off the power of video circuits automatically when there are unnecessary. You can enjoy the sound without the influence of the video circuits. “ALWAYS ON” keeps the power of video circuits on. Depending on the moniter, noise may be produced or the picture may be distorted when the power of the video circuits is turned on. In this case, select “ALWAYS ON”. The default setting is “AUTO OFF”.

1Press SET UP.

2 Press the cursor buttons ( or ) to select “V. POWER”.

3Turn the jog dial to select “AUTO OFF” or “ALWAYS ON”.

Power to digital circuitry

“AUTO OFF” turns off the power of the unnecessary digital circuits automatically when you use analog inputs or functions like ANALOG DIRECT that bypass digital processing. You can enjoy the analog source without the influence of digital circuits. “ALWAYS ON” keeps the power of digital circuits on. Select when set to AUTO OFF and you do not like the time lag when digital circuits are turned on, etc. The default setting is “AUTO OFF”.

1Press SET UP.

2 Press the cursor buttons ( or ) to select “D. POWER”.

3Turn the jog dial to select “AUTO OFF” or “ALWAYS ON”.

Sound Field Link

When set to “ON”, the sound field that was last applied to a program source is automatically applied whenever it is selected. For example, if you listen to CD with STADIUM as the sound field, change to a different program source, then return to CD, STADIUM will be applied again. If you do not want to use this function, set to “OFF”. The default setting is “ON”.

1Press SET UP.

2 Press the cursor buttons ( or ) to select “S. F LINK”.

3Turn the jog dial to select “ON” or “OFF”.

Adjusting the CONTROL A1 auto

function

Turning on the CONTROL A1 auto function parameter lets you turn Sony components connected via CONTROL A1 cords (see page 12) on automatically when you press the corresponding function button.

Auto function is set to ON by default.

1Press SET UP.

2 Press the cursor buttons ( or ) to select “AUTO FUNCTION.”

3Turn the jog dial to select “ON” or “OFF.”

Operations Other

55