
Troubleshooting (continued)
Noise increases or the high frequencies are erased.
•The record/playback heads are magnetised. Demagnetise them (see page 11).
•Move the tape deck away from the TV or VCR.
The sound is distorted.
•Set DOLBY NR to the same setting in which the tape was recorded.
•Move the tape deck away from the TV or VCR.
There is no sound.
•The mains lead is disconnected from the mains.
•Make sure the audio connecting cords are connected correctly (see page 5).
The remote supplied with the DHC-MD333 does not function.
•Press FUNCTION on the
•Make sure the AU BUS connecting cord is connected correctly (see page 4).
Automatic Source Selection or One Touch Play does not work.
•Make sure the AU BUS connecting cord is connected correctly (see page 4).
The functions tied with the
•Make sure the AU BUS connecting cord is connected correctly (see page 4).
The inserted tape will not eject.
• of the tape deck is OFF. Press
to turn on the tape deck, then press §.
The cassette indicator flashes.
•Press to turn off the tape deck, then
press again to turn on the tape deck.
Specifications
Recording system | |
Frequency response | (DOLBY NR OFF) |
| 50 – 14,000 Hz ( ±3 dB), |
| using Sony TYPE I |
| cassettes |
| 50 – 15,000 Hz ( ±3 dB), |
| using Sony TYPE II |
| cassettes |
Wow and flutter | ±0.13% W. Peak (IEC) |
| 0.07% W. RMS (NAB) |
| ±0.2% W. Peak (DIN) |
Input | TAPE IN (phono jacks): |
| impedance 47 kilohms |
Output | TAPE OUT (phono jacks): |
| voltage 550 mV |
| impedance 47 kilohms |
General
Power requirements |
|
North American model: | 120 V AC, 60 Hz |
European countries model: | |
| 220 – 230 V AC, 50/60 Hz |
Other models: | 110 – 120 V or 220 – 240 V |
| AC, 50/60 Hz |
| Adjustable with the |
| voltage selector |
Power consumption | 12 W |
Dimensions | Approx. 215 × 60 × 230 |
| mm (w/h/d) |
| incl. projecting parts and |
| controls |
Mass | Approx. 2.5 kg |
Supplied accessories: | Audio connecting cords |
| (2) |
Design and specifications are subject to change without notice.
Sony Corporation Printed in China