Playing a tape

You can use any type of tape, TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal), since the tape deck automatically detects the tape type (ATS1)).

1)ATS: Automatic Tape Selection.

Tape deck

2 § 4

TC-TX333

DOLBY NR2) 3 Cassetteindicator ª p

0/)

The remote

 

supplied with

1

the DHC-MD333

 

FUNCTION

 

2 Insert a recorded tape.

With the side you want to play facing up

3 Set DIRECTION to Ato play one side. Set it to a3) to play both sides.

4 Press ·.

Press ªto play the bottom side. FUNCTION switches to “TAPE” automatically, then the tape starts playing.

3)The tape deck stops automatically after repeating the sequence five times.

TAPEª/· TAPEp

TAPE0/)

TAPEP

VOLUME

2)This tape deck is equipped with the Dolby B-type noise reduction system.

1 Press on the DHC-MD333 to turn on the DHC-MD333 component system.

The tape deck turns on automatically.

To play a tape using the DHC-MD333 component system

Do the following operation in step 4;

1Press FUNCTION until “TAPE” appears in the display.

2Press TAPE·on the remote.

To play the bottom side, press TAPEªon the remote.

6