2Connect A to A, and B to B using the audio connecting cords. Insert the plugs into jacks of the same colour.

The two audio connecting cords are the same, so you can connect A or B using either cord.

 

TC-TX333 rear panel

L

 

 

IN

OUT

 

R

 

 

TAPE

 

A

B

 

 

A

B

*

 

**

DHC-MD333 rear panel

:sound flow

*AA

The sound signals of the CD, MD and TUNER flow through the DHC-MD333 to the tape deck when you record to tape.

**BB

The sound signal of the tape deck flows to the DHC-MD333 when you play a tape.

How to insert the plugs

Insert the plugs firmly into the jacks.

Not firmly inserted

Insert to here.

3Set VOLTAGE SELECTOR to the position of your local power line voltage (Except for North American and European countries model).

VOLTAGE SELECTOR

110-120V220-240V

4Connect the Mains lead to a mains after you complete all the connections.

If the plug on this tape deck does not fit your mains, detach the supplied adapter from the plug (Except for North American and European countries).

If there is no sound or the tape does not record at first operation

Make sure the plugs are inserted into the jacks firmly.

•If the plugs are not inserted into the A jacks firmly, you may not be able to record the sound of the CD, MD and TUNER onto a tape.

•If the plugs are not inserted into the B jacks firmly, you may not be able to listen to the sound of the tape deck.

The plugs of the audio connecting cords may be tight. Insert the plugs at the point shown in “How to insert the plugs” in step 2.

5