Other operations

To

Press

Stop playing

p(or TAPEp*).

 

 

Pause

￿(or TAPEP*).

 

Press again to resume playing.

 

 

Fast-forward

p, then )(or TAPE)*) for

 

the top side.

 

p, then 0(or TAPE0*) for

 

the bottom side.

 

 

Rewind

p, then 0(or TAPE0*) for

 

the top side.

 

p, then )(or TAPE)*) for

 

the bottom side.

 

 

Find the

)(or TAPE)*) for the top

succeeding

side.

track (AMS**)

0(or TAPE0*) for the

 

bottom side.

 

 

Find the

0(or TAPE0*) for the top

preceding track

side.

(AMS**)

)(or TAPE)*) for the

 

bottom side.

 

 

Remove the

§on the tape deck.

cassette

 

 

 

Adjust the

VOLUME +/– on the remote

volume

(or turn VOLUME on the

 

DHC-MD333).

*Use the remote supplied with the DHC-MD333. **The Automatic Music Sensor (AMS) feature

detects a blank space of more than four seconds between tracks to locate tracks quickly.

Tips

When you press on the tape deck, only the

tape deck turns on. Press on the DHC-MD333 to turn on the DHC-MD333 component system.

The cassette indicator lights up in red when a cassette is inserted and goes off when no cassette is inserted.

Pressing ·or ªwhen the tape deck is off automatically turns on the tape deck and starts playing a tape if there is a cassette inserted (One Touch Play).

Inserting the tape when the power is off

automatically turns on the tape deck only. Press

on the DHC-MD333 to turn on the DHC-MD333 component system.

You can switch from another source to the tape deck just by pressing ·or ª(Automatic Source Selection).

To start playing automatically from the beginning of the tape after fast winding (Auto Play), press ·while holding down 0(for the top side) or press ªwhile holding down )(for the bottom side).

When you want to reduce the hiss noise in low- level high-frequency signals, set DOLBY NR to ON.

Using the timer function on the DHC-MD333, you can wake up to music at a preset time. For details, refer to “Wake up to music” in the DHC-MD333 component system Instruction Manual. When you set the Wake-up timer, DOLBY NR must be set on the tape deck.

Note

The AMS feature may not work in the following cases:

the blank space between tracks is four seconds or less.

the sound source recorded on the right channel is different from that on the left channel as with a KARAOKE tape.

low volume or low sound continues for a long time.

the TV is too close to the tape deck.

7