Recording manually

With manual recording, you can record just the songs you like from a CD, or start recording from the middle of the tape. You can also record a radio programme or MD.

Tape deck

2

· 6

TC-TX333

DOLBY NR* 4 Cassetteindicator 5 ª p

The remote

 

supplied with

1

the DHC-MD333

 

3

3 Press FUNCTION on the DHC-MD333 until “CD,” “MD” or “TUNER” appears.

4 Set DIRECTION to Ato record on one side. Set it to ato record on both sides.

5 Press rREC on the tape deck.

The tape deck stands by for recording. The indicators on the rREC, ·(for the top side) and ￿buttons light up.

If you want to record starting from the bottom side, press ª(for the bottom side) so the indicator on the ªbutton lights up.

6 Press ￿on the tape deck.

Recording starts.

You can also start recording by pressing the ·or ªbutton that is lit.

7 Start playing on the source component.

TAPEp

TAPEP

*This tape deck is equipped with the Dolby B-type noise reduction system.

1 Press on the DHC-MD333 to turn on the DHC-MD333 component system.

The tape deck turns on automatically.

2 Insert a blank tape.

With the side you want to record on facing up

To

Press

Stop recording

p(or TAPEpon the

 

remote)

 

 

Pause recording

￿(or TAPEPon the

 

remote)

 

 

Tips

•The cassette indicator lights up in red when a cassette is inserted and goes off when no cassette is inserted.

•When you want to reduce the hiss noise in low- level high-frequency signals, set DOLBY NR to ON before step 5 .

•Using the timer function on the DHC-MD333, you can record radio programmes at a preset time. For details, refer to “Timer recording radio programmes” in the DHC-MD333 component system Instruction Manual. When you set the timer recording, DOLBY NR and DIRECTION mode must be set on the tape deck.

9