
Advanced Recording Operations
To stop dubbing
During | Press |
pon deck B | |
|
|
pon either deck | |
|
|
zDuring
Only the pbutton is operative.
zYou don‘t have to adjust the recording level or select the Dolby NR during dubbing
Dubbing is automatically performed with the same recording level and Dolby NR as the original in deck A. If, however, you want to monitor the sound during
zYou can adjust the pitch of the playback on deck A
See page 5.
Note
If a TV set is placed near the tape deck, noise may occur during
Dubbing only specific portions
You can do this only during the
1Press pon deck A at the portion you want to skip.
Deck B changes to recording pause.
2Locate the point you want to resume recording on deck A, then stop the tape.
3Press PAUSE Pon deck B to resume dubbing.
You can make a continuous recording that starts on a cassette in deck A and ends on a cassette in deck B.
DIRECTION MODE | ª/· |
|
|
| |
U |
|
|
|
|
|
| 0 | ) | 0 |
| ) |
| p | ª · | p | ª | · |
| P | R r |
| P R | r |
| § |
|
|
| § |
REC r
1Insert blank cassettes into both decks. Make sure that
2Select the Dolby NR (see page 7).
3Set DIRECTION MODE to RELAY.
4Press REC ron deck A.
Deck A changes to recording pause.
5Start playing the program source.
6Adjust the recording level manually, if necessary (see page 7).
7Start recording.
To record from | Press |
The front side | ·on deck A |
|
|
The reverse side | ªon deck A |
|
|
To stop Relay Recording
During | Press |
Recording on deck A | pon deck A |
|
|
Recording on deck B | pon deck B |
|
|
Note
Make sure that ·on deck B appears in the display. If it doesn’t, press ·on deck B once; otherwise, Relay Recording stops when the reverse side of the cassette in deck B finishes.
14