If your CD player does not have the Peak Search function

The CD player changes to play pause and deck B to recording pause. Press PAUSE Pon deck B to start Synchro-Recording.

To stop CD Synchro-recording

Press pon deck B or the CD player.

zYou can use an optional remote (supplied for TC- WE835S U.S.A. model only) to operate the CD player

To start CD play, press Ptwice; to pause CD play, press Ponce; to locate a CD track, press =or +.

zIf the SYNCHRO button indicator goes off after flashing rapidly

The tape cannot be recorded on because the record- protect tab(s) on the cassette has (have) been removed.

zLength of tape used for recording

Tracks on a CD differ in length. Classical music CDs and others often have tracks that exceed the recording time of a single cassette side. In this case, record the tape manually.

zWhen recording from the middle of the tape

A tape that is inserted and has not been played or recorded on is assumed by the deck to be a new tape, even if the present location is in the middle of the tape. The deck will transport the tape for 10 seconds before starting CD Synchro-recording to bypass the portion corresponding with the leader. To begin CD Synchro- recording without the ten-seconds delay, play or record on the tape for about 10 seconds before starting the CD Synchro-recording procedure.

zIf the tape ends during CD Synchro-recording on the front side of the tape (·lights up) and the DIRECTION MODE selector is set to aor RELAY

Recording of the track ends immediately, the tape direction is reversed, and recording starts again from the beginning of the track. If the tape ends on the reverse side of the tape (ªlights up), CD Synchro- recording stops and the CD player stops playing.

Notes

•To prevent interruption of the recording process, do not press any operation buttons on the CD player during CD Synchro-recording.

•Certain operation buttons on the tape deck are disabled during CD Synchro-recording.

Advanced Recording Operations

Synchro-recording With a CD Player Using a Remote Z

By pressing the START button on the optional remote RM-J910 (supplied for TC-WE835S U.S.A. model only), you can perform Synchro-recording on your tape deck with a Sony CD player. This function is possible only with Sony CD players with remote control capability.

START PRESET

STANDBY STOP

=+ P

1Set the source selector on the amplifier to CD player.

2Insert a CD into the CD player and select the play mode (CONTINUE, SHUFFLE, or PROGRAM) of the CD player.

3Insert a cassette into deck B and select the side(s) to be recorded.

To record on

Set DIRECTION MODE to

Only one side

A

 

 

Both sides

aor RELAY

 

 

4Press STANDBY.

·lights up and the CD player changes to play pause and deck B to recording pause. If · doesn’t light up, press ·once.

To record on the reverse side

Press ªonce.

5Press START.

To stop Synchro-recording

Press STOP.

zIf your CD player has the Peak Search function

After performing Steps 1 to 3 above, press PRESET to turn on the Auto Rec Level function (see page 12). Then continue from Step 4.

zYou can use the remote to operate the CD player

To start CD play, press Ptwice; to pause CD play, press Ponce; to locate a CD track, press =or +.

Note

Some CD player might not start playback when you press START. In this case, press Pon the CD player to start playback.

17