Specifications
System
Recording system
45 sec. (with Sony
Bias
AC bias
Type I tape, Sony Type I (NORMAL): 55 dB
Type II tape, Sony Type II (HIGH): 57 dB
Type IV tape, Sony Type IV (METAL): 58 dB
S/N ratio improvement (approximate values)
With Dolby B NR on: 5 dB at 1 kHz, 10 dB at 5 kHz
With Dolby C NR on: 15 dB at 500 Hz, 20 dB at 1 kHz
With Dolby S NR on
Harmonic distortion
0.4% (with Type I tape, Sony Type I (NORMAL):
160 nWb/m 315 Hz, 3rd H.D.)
1.8% (with Type IV tape, Sony Type IV (METAL):
250 nWb/m 315 Hz, 3rd H.D.)
Frequency response (Dolby NR off)
Tape type
Type I tape, Sony Type I | 30 | – 16,000 Hz (±3 dB, IEC), |
(NORMAL) | 20 | – 17,000 Hz (±6 dB) |
|
|
|
Type II tape, Sony Type II | 30 | – 17,000 Hz (±3 dB, IEC), |
(HIGH) | 20 | – 18,000 Hz (±6 dB) |
|
|
|
Type IV tape, Sony Type IV | 30 | – 19,000 Hz (±3 dB, IEC), |
(METAL) | 20 | – 20,000 Hz (±6 dB), |
| 30 | – 13,000 Hz (±3 dB, |
recording)
Wow and flutter
±0.13% W. Peak (IEC)
0.07% W. RMS (NAB)
±0.18% W. Peak (DIN)
±0.13% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
Variable pitch range (approx.)
Additional Information
Inputs
Line inputs (phono jacks)
Sensitivity: 0.16 V
Input impedance: 47 kilohms
Outputs
Line outputs (phono jacks)
Rated output level: 0.5 V at a load impedance of
47 kilohms
Load impedance: Over 10 kilohms
Headphones (stereo phone jack)
Output level: 0.25 mW at a load impedance of 32 ohms
General
Power requirements
Where purchased | Power requirements |
|
|
U.S.A. and Canada | 120 V AC, 60 Hz |
|
|
U.K., Continental Europe, China | 220 – 230 V AC, 50/60 Hz |
and certain countries in Asia |
|
|
|
Australia | 240 V AC, 50/60 Hz |
|
|
Other countries | 120/220/230 – 240 V AC, |
| 50/60 Hz |
|
|
Power consumption |
|
| |
|
Dimensions (approx.) (w/h/d)
Model for U.K. and Australia: 430 ⋅ 120 ⋅ 310 mm
Model for other countries: 430 ⋅ 120 ⋅ 290 mm
(17 ⋅ 4 3/4 ⋅ 11 1/2 in.)
including projecting parts and controls
Mass (approx.)
4.3 kg (9 lbs 8 oz)
Supplied accessories
See page 4.
Optional accessory
Remote commander
For more information on the availability of the remote commander, contact your nearest Sony dealer.
Design and specifications are subject to change without notice.
21