Creating Your Own Program (RMS Play)
By creating a program, you can play back tracks on deck A in any order that you want. The Random Music Sensor (RMS) function lets you create a program of up to 28 tracks, from the 1st to the 14th tracks on each side of the tape.
RMS buttons (RMS/START, SET, CHECK, DISPLAY)
U
0 | ) | 0 |
| ) |
p | ª · | p | ª | · |
P R | r | P | R | r |
§§
0/) p ª/·
1Press RMS/START.
“RMS” and a flashing cursor appear in the display.
2Press ª (BACK) or · (FRONT) to select the side of the tape.
ª or · appears in the display.
3Press 0 or ) repeatedly until the track number you want appears in the display.
0 |
| 3 |
|
|
| · |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| ||
FRONT |
|
|
|
|
|
|
|
|
|
|
|
|
RMS | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 11 12 13 14 | ||
BACK |
|
|
|
|
|
|
|
|
|
|
|
|
Side of the cassette
Track number
4Press SET to store your selection.
To program the same track again, press SET once more.
| 1 |
|
|
| 3 |
|
|
| · |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| FRONT |
|
|
|
|
|
|
|
|
|
|
|
| |||
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 11 12 13 14 | |||||||
| RMS | |||||||||||||||
| BACK |
|
|
|
|
|
|
|
|
|
|
|
| |||
Track number
Order on the program
Advanced Playback Operations
5Repeat Steps 2 to 4 to program more tracks.
If “FULL” appears in the display
This means that you’ve already programmed 28 tracks and can’t program any more.
6Press RMS/START to start RMS Play.
The peak level meters appear in the display.
To stop RMS Play
Press p(CLEAR) once. The RMS program still remains.
To cancel RMS Play
Press p(CLEAR) repeatedly until the peak level meters appear in the display or eject the tape in deck A. When RMS Play is canceled, the RMS program is automatically erased.
To alternate between the RMS and peak level meter displays
Press DISPLAY.
zYou can play the program again after RMS Play ends
Press RMS/START.
Notes
•During RMS Play, you can only use the CHECK, DISPLAY, and p buttons on deck A, and the p, 0, and ) buttons on deck B.
•The RMS function may not work properly if a blank space between tracks is short.
•If there is a long blank space between tracks, the deck may
•If your program includes a number for a track that does not exist, the deck will skip that number during RMS Play.
Checking the order of tracks in the program
Press CHECK.
Each time you press this button, the display shows the track numbers in the order they were programmed. After the last track in the program, “End” appears in the display.
(Continued)
9