Sony TC-WE635 Locating a Track (Multi-AMS/Auto Play/Memory Play), Advanced Playback Operations

Advanced Playback Operations

Locating a Track (Multi-AMS/ Auto Play/Memory Play)

You can locate the following/previous tracks within a range of 30 tracks (Multi-AMS: Automatic Music Sensor) or the beginning of a tape quickly (Auto Play). You can even locate a specific point anywhere on a tape (Memory Play).

RESET MEMORY RESET MEMORY

U

0	)	0		)
p	ª ·	p	ª	·
P	R r	P	R	r
§				§

0/) ª/· 0/)

Note

Check the direction indicator of the deck you use. When you locate a track on the reverse side (when ª lights up), press the button(s) in the parentheses.

To locate	Press
The beginning of the	)(or 0) as many times as you
next or succeeding	want during playback.
tracks	For example, to locate 2 tracks
(Multi-AMS)	ahead, press twice.
The beginning of the	0(or )) once during playback.
current track
(Multi-AMS)
The beginning of the	0(or )) as many times as you
preceding tracks	want during playback.
(Multi-AMS)	For example, to locate 2 tracks
	behind, press three times.
The beginning of a tape	MEMORY on the deck being used
(Auto Play)	repeatedly until “M” disappears in
	the display. Then press 0(or ))
	while holding down · (or ª).
A particular point on a	MEMORY on the deck being used
tape (Memory Play)	repeatedly until “M” appears in the
	display. Find the point you want,
	then press RESET to reset the tape
	counter and to memorize the point.
	To locate the memorized point and
	start playback, press 0(or ))
	while holding down · (or ª).
	(Press 0or )to stop at “0.00”
	(TC-WE835S only) or at “0000” (TC-
	WE635 only). )

Notes

•The Multi-AMS function may not work correctly if:

—the blank space between tracks is less than 4 seconds long.

—there is a passage of low frequencies or very low volume within a track.

—the signal strength of the left and right channels are very different.

•The Multi-AMS function is inoperative on a deck whenever the other deck is playing, recording (except during dubbing), or in pause.

•Even if the DIRECTION MODE selector is set to a, the deck stops when the current side reaches the end during Multi-AMS operation.

•The tape counters are reset to “0.00” (TC-WE835S only) or to “0000” (TC-WE635 only) when you turn off the tape deck.

8