Specifications
SystemApprox. 100 sec. (with | |
| Sony |
Dolby NR off) | 55 dB, using Sony TYPE I |
| cassette |
| 57 dB, using Sony TYPE |
| II cassette |
| 58 dB, using Sony TYPE |
| IV cassette |
S/N ratio improvement | With Dolby B NR on: |
| Approx. 5 dB at 1 kHz, |
| 10 dB at 5 kHz |
| With Dolby C NR on: |
| Approx. 15 dB at 500 Hz, |
| 20 dB at 1 kHz |
Harmonic distortion | 0.4% (using Sony TYPE I |
| cassette): 160 nWb/m |
| 315 Hz, 3rd H.D.) |
| 1.8% (using Sony TYPE |
| IV cassette): 250 nWb/m |
| 315 Hz, 3rd H.D.) |
Frequency response | |
(DOLBY NR OFF) | IEC), |
| (±6 dB), using Sony |
| TYPE I cassette |
| |
| IEC), |
| (±6 dB), using Sony |
| TYPE II cassette |
| |
| IEC), |
| (±6 dB), |
| (±3 dB, |
| using Sony TYPE IV |
Wow and flutter | cassette |
| |
±0.13% W. Peak (IEC) | |
| 0.1% W. RMS (NAB) |
| ±0.2% W. Peak (DIN) |
±0.15% W. Peak (IEC) | |
| 0.1% W. RMS (NAB) |
| ±0.2% W. Peak (DIN) |
Variable pitch range | Approx. |
Line inputs (phono jacks) sensitivity 0.16 V, input impedance 47 kilohms
OutputsLine outputs (phono jacks) rated output level 0.5 V at a load impedance of 47 kilohms, load impedance over 10 kilohms
Headphones (stereo phone jack)
output level 0.25 mW at a load impedance of 32 ohms
GeneralPower requirements
U.S.A. and Canadian models:
| 120 V AC, 60Hz |
British models: | |
Other European models: | 230 V AC, 50/60Hz |
Australian models: | 240 V AC, 50/60Hz |
Other models: | |
| 50/60Hz |
| Adjustable with voltage |
Power consumption | selector |
| |
22 watts | |
18 watts | |
Dimensions (w/h/d) | Approx. 430 ⋅ 120 ⋅ |
| 300 mm |
Mass | 4.2 kg |
Audio connecting cords (2) Control A1II cable (1)*
* Supplied for Canadian models only
Optional accessoryRemote commander
For more information on the availability of the remote commander, contact your nearest Sony dealer.
Design and specifications are subject to change without notice.
Information Additional
23