Recording on a Tape
Recording on a tape
1 Turn on the amplifier and play the program source you want to record.2 Press POWER, and press A fully to open the cassette holder, then load a cassette. 1)
With the side you want to record facing you
1)On the
On the
3 Set DIRECTION MODE.
To record on | Set to |
Only one side | g |
|
|
Both sides2) | s |
2)Recording stops when the tape reaches the end of reverse side.
4 Press z REC.Hlights up for recording on the side facing you. If it doesn’t, press Honce.
The tape deck automatically adjusts the recording level (see page 12). After the AUTO indicator lights up continuously, stop playing the program source. If you wish to adjust the recording level manually, see “To adjust the recording level manually” on page 11.
Do not press POWER or A while the tape deck is operating. If you do so, the tape may be damaged.
5 Press X PAUSE or H. Recording starts.6 Start playing the program source.To | Press |
Stop recording | x |
|
|
Start recording from the | h twice in Step 5 |
reverse side |
|
|
|
Pause | X PAUSE. Press the button |
| again to resume recording. |
|
|
Take out the cassette | A after stopping recording |
|
|
Tip
To protect recordings against accidental erasure, break out the
Set DOLBY NR to ON
If the FM reception is unsatisfactory, set DOLBY NR to ON FILTER (multiplex filter).
Tip
The Dolby HX Pro 3) automatically works during recording.
Distortion and noise in the
3)Manufactured under license from Dolby Laboratories.
HX Pro headroom extension originated by Bang & Olufsen.
“Dolby”, “HX Pro”, and the
10